92776d2cfc13bebae557cebf3073ab462db20fb3
4 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 3dtours
|
6d60d452e0 |
One move of the light for the whole app: a mask's EXPOSURE and its four tone knobs stop being a second opinion
A gradient mask had its own tone formula and its own exposure, and both disagreed with the frame's. Before any of this was tidied, the mask ran a smoothstep luma lift with an arbitrary 0.55..1.35 chroma clamp while the frame moved the knots of a four-zone ramp, and the mask's exposure was a stop on sRGB-encoded values while the frame's was a stop on light. Two names, four moves, and the same slider meant different things depending on whether the pixels were inside the shape you drew — the divergence §3.3 of the Android port's compat doc warns about. The maths is one string now (TONE_MATH_SKSL, interpolated by both passes): the ramp the four knots build, the hue-preserving rebuild behind it, the transfer pair, and exposureMove. A mask calls the same functions the frame calls. The rebuild carries the chroma instead of re-scaling it. Lightness takes the curve and the colour rides the difference — the channel differences move by ONE shared scale k, pulled back only where the cube has no room left. The doc's ratio (R_new = R_old * Luma_new / Luma_old) was the old reading and it is exact only while nothing clips: a channel past 1.0 stops being scaled with its neighbours and the hue goes with it. Measured on a flat patch frame, a skin tone at 24.0° came back at 48.0° at HIGHLIGHT +100, a warm white at 37° at 57.4°, and under L = 0.5 the same ratio multiplied a near-black pixel's cast by x30 — colour noise amplified, which is why the 0.55..1.35 clamp was there. The scale is the chroma's own now: over 135 knob combinations on seven colours and five greys, the ramp moves the luma and the hue does not move at all (Δ < 1e-9°). EXPOSURE gets the same treatment, which is what the second half of the request was: the linear domain decides where the luma is going, and the pixel is rebuilt onto it through the same lightMove. The old pass multiplied the three channels in linear light, so +1 EV clipped them by three different amounts: measured on the scratchpad probe, 29.2° of hue drift on a skin tone at +1 EV and 33.3° at +2, against 0.00° here. The stop is applied as a ratio on the pixel's own encoded luma rather than pointed straight at the encoded linear target, which is what makes the knob exactly the identity at 0 EV — the transfer does not commute with the luma weights, so pointing at it brightened a colour by a couple of code values even at zero. A grey is the knob it always was: 128 through +1 EV is 176, the same number the linear per-channel multiply put there, so nothing a user has dialled in moves. Verified: `npx tsc --noEmit` clean, `npm run build` clean. highlight-knee-check now runs EXPOSURE_SKSL for real — compiled with CanvasKit and four pixels pushed through it, agreeing with the twin to a code value on a grey at +1 EV (176), a skin tone at +1 EV and +2 EV, and a shadow at -2 EV; it also pins the hue, the cube, the identity at 0 EV and the black pixel that has no light to move. mask-wb-check compiles the mask pass and pushes the same stops through it: 128 through +1 EV is 176, through -1 EV is 92, +2 EV lands the channel on the ceiling at 255 and holds the hue within 3°. auto-tone-check, preview-match-check, white-level-check, raw-develop-check, half-check and roll-walk-check all pass. Live on the built bundle in a 1440x950 browser: the LIGHT panel's EXPOSURE +1 EV takes the mid grey of a flat patch frame from 0.502 to 0.690 (a stop on light gives 0.686) and moves no patch's hue at -1 EV (Δ 0.00°), and a linear gradient mask's EXPOSURE +1 EV and HIGHLIGHT +100 move the pixels inside the mask (luma 185.9 -> 211.1 and 185.9 -> 197.5) while the corner outside it does not move at all (220.2 -> 220.2), with no console error. Co-authored-by: PenguinHarness <noreply@penguin.local> |
||
|
3dtours
|
c0aaa67361 |
Studio: fold WB and FX into LIGHT, and put every develop slider on -100..+100
WB and FX were separate tabs whose only content was the same Lightroom-style develop column LIGHT already renders, so the rail carried three doors into one room. LIGHT now owns the whole column: white balance, tone, presence, the effects group (grain, dehaze, vignette) and the filters, in that order. The `wb` and `fx` TabIds, their rail entries, their `wbLabel()` helper and the now dead `tab.wb` / `tab.fx` i18n keys are gone; `ToolRail` documents eight tabs. Every continuous develop value that the UI exposes as a symmetric knob now runs -100..+100 instead of -10..+10. `paramDefs` gains the `HUNDRED` key set and the `deepen` helper, which widens a def's range and scales its accessors by ten, so the store keeps its -10..+10 internal scale and every stored look, DEFAULT_RECIPES entry and URL round-trip is byte-identical. Params with a meaningful physical scale (temperature in kelvin, exposure in EV-ish units, grain, grain size, hdf, vignette, rotate, crop) keep their own units. Highlight recovery no longer bends hue. The old knee clamped the per-channel gain into 0.55..1.35, which is a per-channel operation and therefore a hue rotation: on the flat skin patch it walked hue from 24 deg to 48 deg at HIGHLIGHT +100, and on a saturated 30:1 chroma ramp it desaturated toward black instead of toward white. The shader now caps the pixel's distance from its undersaturated knee point while preserving the direction of that offset, i.e. it scales chroma and keeps hue, then clamps into gamut. Verified: - `npx tsc --noEmit` clean; `npm run build` clean. - `node scripts/highlight-knee-check.mjs` (pins the new shader source and twin-tests 135 knob combinations) ok. - Existing checks re-run green: `auto-tone-check`, `half-check`, `white-level-check`, `preview-match-check`, `library-check`, `scan-nav-check`, `roll-walk-check`. - Live browser pass: rail shows exactly the seven expected tabs with no WB or FX; LIGHT renders 5 panels / 23 `data-key` knobs; 12 knobs report `min=-100 max=100`; everything else keeps its own range. - Highlight hue measured on ten flat colour patches: HIGHLIGHT -100 gives a hue delta of 0.00 deg on every chromatic patch; HIGHLIGHT +100 stays within 0.22 deg (sky) and 0.28 deg (magenta) wherever chroma survives, and the patches the ramp intentionally drives to white arrive fully neutral. Greys stay neutral (channel spread <= 2/255) at every knob setting. Skin patch before/after: 23.94 deg -> 0.00 deg. ponytail: temperature (2500-10000 K), exposure (+-10 units at 0.25 EV each), grain, grain size, hdf, vignette, rotate and crop deliberately keep their own scales rather than the blanket -100..+100; widen them the day a user asks for more range, not before. Hue assertions live in the flat-patch check because real-photo measurements pick up 2-4 deg of resample drift from the snapshot pipeline that has nothing to do with the shader. Co-authored-by: PenguinHarness <noreply@penguin.local> |
||
|
3dtours
|
34f8601c91 |
studio: the develop column becomes five panels, and the four tone knobs move knots instead of channels
Two specs, one commit: the develop state becomes the panel column the Lightroom spec draws, and HIGHLIGHT, SHADOW, WHITE and BLACK stop being edits and become shapes of the tone curve, the way the mapping spec measures them. The column. The left rail used to hand LIGHT a row of chips and nothing else; the four tone knobs were chips that opened a curve, and the rest of the develop state lived in the chip row's own vocabulary. `DevelopPanels` renders the five sections of the spec instead — PROFILE, WB, TONE, PRESENCE, DETAIL & EFFECTS — as an accordion, all open, and every parameter the recipe holds has a row in it with a `data-key` off the parameter name: slider, value readout, double-click to default. Sliders are always visible, so a knob is one drag away instead of two taps, and TEMPERATURE and TINT draw their gradient underneath (blue through amber, green through pink) so the direction is on the control. The PRO looks the spec marks stay in the list but locked, tagged PRO, and tapping one asks for PRO — they are shown, not hidden, and not silently dropped. WHITE and BLACK move out of the WB group. They were the temperature group's extremes, which is what a white balance control does — the toe and the shoulder of the same ramp — but the spec puts them with the tone knobs and gives them the two ends of the tone curve, and that is what they now are. `wb` is TEMPERATURE and TINT and nothing else; `whites` and `blacks` sit in `iq` beside `highlights` and `shadows`, labelled WHITE and BLACK, in the tone panel where the slider lives. A recipe written before this commit still reads: the keys are unchanged. The four knobs. The first pass of the mapping spec added a mask per zone onto the channel: `luma += knob * mask * intensity`, and the shader followed it. It is the wrong shape, and the twin harness in `highlight-knee-check.mjs` shows why — the four masks are not a partition of the ramp. They sum to one at the ends and to zero at the midpoint, so an adjustment in the middle of a zone is applied where the mask is half and not at all where the mask has fallen to nothing, and the ramp inverts: with every knob at its stop the curve folds over itself, slope −5 at t=0.87, and the twin catches it as a non-monotone ramp. So each knob moves a knot on the curve instead, which is the reading the spec's own mask geometry points at — BLACK peak at 0.00, SHADOW 0.00→0.25→0.50, HIGHLIGHT 0.50→0.75→1.00, WHITE peak at 1.00 — and the shader builds the curve through those four anchors. `TONE_ANCHOR` is 0.25: one full knob at its stop is a quarter of the range at that knot, so the range is 0.75..1.00 at the top and 0.00..0.25 at the bottom, and the anchors stay ordered (`a0 ≤ a1 ≤ 0.5 ≤ a3 ≤ a4`) by clamping each against its neighbour. Between knots the curve is a straight line, and 0.5 is untouched by every knob, so a knob at zero is the identity exactly rather than nearly, and any combination of the four is monotone. The mask sum survives where the spec is right about it: it hints the split between the two dark zones and the two light ones, nothing else. The hue is kept the way the spec keeps it: work in luma, then scale the chroma offset — `rgb = luma_new + (rgb - luma_old) * luma_new / luma_old` — so a saturated red stays the same red and only its brightness moves. The ratio is clamped to 0.55..1.35 because at luma near zero the division is the whole highlight of the picture on one code value. Verified: - `node scripts/highlight-knee-check.mjs` passes. It pins the settled shader — four masks, four anchors, the four `mix` lines — and asserts the constructions it replaced are gone, then drives a twin of the ramp in JS: the masks do not overlap, every knob at zero is the identity, the midpoint is 0.5 for all 162 combinations of the four knobs, every combination is monotone, the amplitude at each stop is a quarter, and the DR offsets land on 0.12 and 0.82. The folded case from the additive build is in the harness as a regression. - `npx tsc --noEmit` clean; `npm run build` emits `index-DXIIw2F1.js` and `index-A4pA1U5f.css`; `library-check.mjs`, `scan-nav-check.mjs`, `roll-walk-check.mjs`, `auto-tone-check`, `half-check`, `preview-match-check` and `white-level-check` all pass against the bundle — the catalogue, the RAW path, auto tone and the white level are untouched by the panel move. - Driven in a real browser (`tone-live-check.mjs`, Chromium against `vite preview`, a P1010256.JPG in the source control, mean luma of the preview canvas read before and after each knob): neutral 184.25, WHITE +1 187.35, BLACK +1 186.35, SHADOW +1 194.53, EXPOSURE +1 206.99, HIGHLIGHT −1 173.80. Every knob moves the picture the way the spec says it should and none of them moves it much — a stop of a knob is a quarter of a zone, not a level. - The same run asserts the built DOM: five panels, the 23 `data-key` rows, `dev-temperature` in WB, `dev-whites`, `dev-blacks`, `dev-highlight` and `dev-shadow` together in TONE, the gradient classes on the two white balance sliders, and the chip slots the panel is handed. The only failed request is `/api/events`, which is the backend this preview does not run. ponytail: the recovery of blown highlights that used to sit under HIGHLIGHT — a per-channel rolloff in linear light — is gone, deleted rather than ported. The additive mask is why it was there: HIGHLIGHT had to do two jobs because a mask could not shape a curve. Now that WHITE owns the top end, HIGHLIGHT only bends, and the per-channel rolloff is a second knob for the same picture. Bring it back as its own parameter if a frame ever clips badly enough to need it. Also dropped: DR used to ride along as two additive terms. That is where the fold at t=0.238 came from, BLACK −1 and SHADOW −1 together — the two terms pushed the ramp past its own end. It shifts the knots now, which is what the film sims always meant by it, and the numbers in the sims were kept and their meaning recommented (classic-chrome toe 0.22, head 0.7375, etc.). Co-authored-by: PenguinHarness <noreply@penguin.local> |
||
|
3dtours
|
224ff0b935 |
web: open a RAW at the resolution of its sensor, not at the quarter of it
LibRaw's half-size demosaic was on. The Ricoh GR's own DNG (D0004128.DNG) developed to 3010x2012 while the JPEG written beside it in the same second is 6000x4000, and the Fuji's RAF to 3008x2007 against its own 6000x4000 -- the quarter was the flag, not the file. With `halfSize: false` the same develop returns 6020x4024 and it is the sensor's frame on every body tried: D0004128.DNG 6020x4024 IMGP6916.DNG 6028x4024 DSCF1701.RAF 6016x4014 _DSC0009.ARW 6024x4024 AFXT2721.RAF 6246x4170 Nikon-D850 NEF 6216x4136 _GDN0447.NEF 4284x2844 P1010607.RW2 3472x3472 5G4A9396.CR2 2880x1920 Nine files, 27s to 155s a develop on one core. Checked through the app itself, not only through LibRaw: photo-dims 6020x4024 on the DNG against 6000x4000 on the JPEG, both err none. The colour it opens with is now fitted per file to the preview the camera wrote into it (previewMatch.ts): a 3x3 over a block grid of the develop against the same grid of that preview, then one cubic a channel for what the 3x3 leaves. The offline per-body table this replaces (cameraMatch.ts) stopped matching the moment the path under it changed -- its rows no longer summed to 1 once the highlight knee landed ahead of it -- and a body with a row opened with a cast one without did not. The file's own preview does not age. The white level the gain carries is the frame's own plateau rather than `maximum` (sensorWhite.ts), a factor of 1.89 to 2.00 out; without it every frame opened a stop bright and a body that sat lower (X-Trans, 1.892) never reached the highlight desaturation at all. The desaturation gate reads the gain-lifted levels as well as the sensor's, which is the whole of the magenta: on a body whose cam_mul lifts red and blue (the GR's [2.64, 1, 1.73]) a blown sky crosses the white level at 0.38 of the raw range in red while green crosses at 1.0, so a gate read on the sensor's levels alone stayed shut across it. Measured in the app against the camera's own JPEG, mean dRGB over a 16x16 block grid: +1.20, -5.95, -6.11 with the sensor's clip alone, +0.21, +0.24, +0.47 with both, mean |dL| 21.5 against 10.3. The same grid on the Fuji comes back balanced (+4.7, +5.0, +3.6) and best aligned at offset 0,0. -HL is recovery and +HL is a lift, so they are different moves now: recovery is the doc's soft knee in linear light over the top half, which is the only term in the tone shader that is not a shift and the only one that can put detail back into a blown sky rather than merely darken it. The four checks pin the develop down where it can only run in a browser: raw-develop-check, preview-match-check, white-level-check, highlight-knee-check. |