MONOCHROME GRAIN was one integer knob 0..10 with one meaning, how much. It is now
a strip of three: AMOUNT — the same knob, in half steps — SIZE, a percentage of
the stock's own grain cell (50..200%, so the same number means the same texture
relative to the picture on both platforms), and an inert readout of N/INCH, the
clump count the two knobs and the stock add up to in the print's own terms (300
dpi = 300px of the 1080-wide reference the knob was tuned at).
Emulsion is not one grain size across the frame: the coating settles unevenly.
The field now prints that — the same hash read slowly (ZONE_FREQ = 1/96 cells,
turned off the axes, smoothed so a border between two patches is a slope and not
a seam) swings each patch's own cell by half of ZONE_SWING either way, ±20%.
Nothing in it moves the field's mean: a coarser patch prints bigger clumps, not a
brighter one, which is why the strip can read out one number while the frame
carries a range.
A patch may not swing a cell under the pixel the target can print, or the clumps
are sub-pixel and print as static — aliasing, not a finer emulsion. The shader
takes that floor as a `mincell` uniform beside the cell (u, mincell, seed.xy, in
declaration order): an export passes one output pixel, a preview one device pixel
(1 / PixelRatio), which is the floor the phone's preview already needed.
SIZE is stored as an integer percent so no float noise reaches the recipe JSON,
and it is read by the same two engines that read grain: the web's
grainCell(width, stock, sizePct) and the phone's grainCell(width, minCell,
sizePct). The chip above the strip carries the amount in half steps the way TEMP
carries the kelvin, and the readout moves with SIZE, not with AMOUNT.
Measured:
grain-controls-test.cjs 20/0 — the strip carries grp-grain, grain:amount,
grain:size and grain-inch; the AMOUNT ruler is 0..10 step 0.5, and 3 -> 3.5
moves the frame (sigma 18.53 -> 21.91, new hash) without moving the readout;
10 -> sigma 60.43, 0 -> sigma 0; SIZE 200% -> 130/INCH (sigma 40.06), 50% ->
522/INCH (66.56: under the preview's pixel floor what is printed is static,
not finer grain); the region claim on an 8x8 grid of the flat frame gives
tile sd 51.0..66.1, max/min 1.295, and a tile mean spread of 1.14 — a coarser
patch is not a brighter one.
grain-size-test.cjs 17/0 (was 12/0) — the SIZE rule and the readout on the
module itself: 200% doubles the cell, 50% halves it, the output pixel still
floors the smaller one. 4000px file cell 3.704 against 1.083 device px on a 3x
preview, the old one-dp floor 2.77x coarser, rho1 0.627 against 0.074. The
harness built its own 3-uniform array; it now passes [u, mincell, seed.xy]
like every other caller.
_grain-zone-ck.cjs — the zone's own contribution, at preview scale (cell 1.70,
1600px, 8x8 tiles of 200px): zone on, tile sd 23.22..24.82 (ratio 1.069);
zone off, 24.42..24.79 (ratio 1.015). Nothing else differs.
_grain-ck.cjs — the clump field is otherwise what it was: rho1 0.62
classic-neg / 0.12 velvia, residual autocorr 0.035 against 0.036 with the
swing forced to 0, peak/median 32.3 against 27.6.
_grain-spectrum.cjs (app, 1600px render) — residual autocorr 0.017..0.018,
spectral peak/median 4.6..6.1: the slow lattice adds no peak of its own.
grain-stock-test 53/0, sims-test 31/0, fx-mono-test 15/0, wb-preset-test 33/0,
temp-swatch-test 33/0, wm-font-test 38/0, grain-analog-test 7/0 (its grain
selectors moved to the strip).
tsc: web clean; the phone's scoped config reports exactly the pre-change
baseline (Viewfinder.tsx's own errors, none new).
ponytail: the amount is fractional now, so the two recipe-create forms read grain
through their own half() instead of the int() that would truncate the half the
ruler just spent — every other knob there is still whole. The SIZE knob is one
number for the whole strip: no way to dial a single patch, and no seed control.
The readout is the DESIGN count the field is built on, never a per-patch
measurement.
TEMP was a kelvin and nothing else, and the seven presets were seven numbers
the two platforms disagreed about: AUTO 5500, DAYLIGHT 5600, DAYLIGHT -3R
5800, CLOUDY 6500, SHADE 7500 here and 8000 in both recipe-creation forms,
TUNGSTEN 3200, FLUOR 4000. A chip tapped in the recipe panel and the same
chip tapped on the photo printed different frames.
The presets are now the phone's own WB_PAIRS — kelvin AND tint — in all three
places, so every chip lands the same pair on either platform:
AUTO 5500/0 DAYLIGHT 5500/0 DAYLIGHT -3R 5500/-3 CLOUDY 6500/1
SHADE 7500/2 TUNGSTEN 3200/0 FLUOR 4000/3
SHADE read 8000K in RecipeCreatePanel and RecipeCreateModal; it is the WB
tab's 7500K/+2 now, so a recipe created in a form prints what the same chip
prints on the photo.
AUTO and DAYLIGHT stand for one pair, so the pair alone cannot say which of
the two is lit. TEMP is therefore keyed by preset and not by value: `wbChoice`
remembers the chip last tapped (the phone's own wbChoice), and `wbValue()`
answers it only while the engine pair still matches, else the first preset
that pair maps to, else the bare kelvin. `wbLabel()` names that pick on the
chip, which now always carries one: TEMP AUTO at the neutral pair, TEMP SHADE
on a preset, TEMP 6300K on the app's own default recipe where a hand-dragged
ruler landed. Measured on the deployed build (`wb-preset-test.cjs`, 33/0):
AUTO and DAYLIGHT print the same frame to the level, DAYLIGHT -3R moves the
green away from DAYLIGHT at the same 5500K, the ruler warms monotonically
across TUNGSTEN 0.525 / FLUOR 0.730 / AUTO 1.000 / CLOUDY 1.141 / SHADE 1.295,
a hand-drag to 10000K names the chip `10000K` and warms the picture R x1.183
B x0.793, SHADE tapped after that drag restores the pair 7500/2 and prints the
same frame the first tap did (R 156.8 vs 156.8), and a temperature drag leaves
a preset's tint standing (FLUOR's +3).
kelvinToRGB itself was the other half. It took the ratio of the sRGB-ENCODED
blackbody colours and square-rooted it, which measured R x1.06 / B x0.89 from
5500K to 10000K — a shift a swatch shows and a sunset does not. White balance
is a gain on LIGHT, so the ratio is taken in linear light now
(`planckianLinear`) and tamed by a new `KELVIN_TAME = 0.5`: the same 10000K
moves the frame R x1.16 / B x0.76, and 2500K its mirror, which is what a
camera does with its WB set 4500K off the scene. One constant scales the whole
ruler and both platforms carry the same one. Measured through the app
(`_temp-probe.cjs`, gains against 5500K): 2500 R x0.569 B x1.640, 4000 R x0.866
B x1.197, 6500 R x1.057 B x0.940, 10000 R x1.140 B x0.759 — the readout is
compressed against the raw gain because the cast lands on encoded, clipping
pixels, which is the reason for the tame in the first place.
ponytail: no scene meter, so AUTO stays the neutral 5500K/0 pair and is a name
for it, not a measurement. Add one when the engine reads the frame.
ponytail: KELVIN_TAME scales the whole ruler both ways. Split it into a warm
and a cool constant only if the two ends are ever asked to move apart.
Verified: `wb-preset-test.cjs` 33/0 and `_temp-probe.cjs`, `sims-test.cjs`
31/0, `fx-mono-test.cjs` 15/0, `wm-font-test.cjs` 38/0 against the deployed
build; web `tsc --noEmit` clean, the phone's scoped check down to its two
pre-existing `skiaImage.ts` nulls.
The camera preview, the library preview and the exported file each carried
their own copy of the grain shader, and each sized it off the rect it happened
to be drawing on. Two things were wrong with that. The field was a single value
hash, so it looked like digital static rather than film: measured on the noise
plane, neighbour correlation was flat and the lattice sat on the picture's own
axes; and it was the same field in every session, so two photos from two
launches printed identical grain. The size rule was wrong the other way round:
canvas units in Skia are dp, so on a 3x phone the floor of one dp pinned a
390dp-wide preview to a THREE device-pixel cell while the file printed a
1080th of its width — 2.77x coarser than the picture it was previewing, which
is the preview-vs-file mismatch all over again, just the other direction.
Grain now lives in one module, src/utils/grainShader.ts, imported by the
preview (both surfaces), the phone's export and the web engine, so the three
cannot drift. The noise is three octaves of value noise over a density that is
the mean of three hashes — a bell, the way an emulsion's density swings —
turned 20 degrees off the axes, seeded once per app launch, so a session prints
one roll and the next launch prints another. Only coarser octaves: a finer one
lands under the pixel and the clumping is lost outright. The cell is one
1/1080th of the PICTURE's width, floored at one pixel OF THE TARGET — an
export's own output pixel, a preview's device pixel (1 / PixelRatio.get())
instead of a whole dp.
Measured on the plane itself with the real module (grainSize harness): the file
at 4000px and a 390dp camera preview at 3x agree on the same fractional lag,
rho 0.017 against 0.011, while the floor this replaces reads 0.329 — visibly
coarser, as claimed; both keep the spread the AMOUNT knob was tuned on
(sigma 57.8 / 57.9) and still clump (rho(1) 0.91 / 0.39); R, G and B never move
apart, split 0. GRAIN_SKSL compiles on the Skia runtime, and the compile is now
swallowed into null at module scope like the other three effects, so a shader
this app cannot compile costs the grain rather than a launch.
Not ported: the Kotlin grainOverlay probe (per-pixel, path is off by default).
Bound the geotag fix with a 2 s deadline and prewarm it at launch, queue a
shot pressed before the camera session binds and replay it, pass the options
argument capturePhotoToFile requires, save through the native path so the
media permission is not needed, and release the Skia surface and bitmap after
every export. Store the JS bundle uncompressed and load the export pipeline on
demand. Note in RELEASE_NOTES.md that none of this moved the tap threshold.
0.5x is a bare Camera2 session, so CameraX never saw the flash setting and the ultra-wide still came off unlit. The native module now reads FLASH_INFO_AVAILABLE off the lens, maps off/auto/on to CONTROL_AE_MODE plus FLASH_MODE_SINGLE, and starts an AE precapture so the HAL can meter the flash before the frame. The viewfinder hands its flashMode down beside the shutter, with a Zap control that only appears where a unit exists.
Library CROP now resizes the band in photo fractions, the way FREE always
did, instead of panning a re-scaled photo under a screen-sized rectangle:
what the band encloses is the export, with no zoom transform left to undo
and no aspect that only holds on a square photo. The band is laid out
below the top strip, whose height TopBar now reports, so it can never
peek under the header. The grain hashes a cell of width/1080 instead of
the raw pixel grid, so a 4000px export is no longer ~4x finer than the
preview that tuned it.
The ultra-wide preview is a bare Camera2 surface: it never goes through
Skia, so the software EV gain that carries exposure on the 1x preview had
nothing to act on and quick EV / the LIGHT-EV slider did nothing at 0.5x.
The lens itself now takes the bias, as CONTROL_AE_EXPOSURE_COMPENSATION on
every preview request (session builder, metering rebuilds, and a setEv call
the viewfinder pushes whenever the value changes).
The still is left alone: capture() pins the compensation back to 0 and
waits on an AE precapture trigger, so the file stays unbiased and the export
applies its software gain exactly once, as it does for the 1x path. The
hardware range clamps the bias where the lens offers less than the app's
+/-3 EV.
- One free Play app (com.locphamtran.recipescamera) with an expo-iap PRO
unlock, replacing the paid apk for the store channel
- Android SEND/SEND_MULTIPLE share target feeds photos into the editor,
on cold start and on resume
- BACK button in the TopBar and press-and-hold PEEK replace the chip row
- NOISE REDUCTION and SHARPENING accept -10: a negative SHARPENING softens
the frame before the grain pass, a negative NOISE REDUCTION re-grains it,
in the Skia engine, the live preview and the Kotlin export path alike
Rename LIGHT GLOW to HDF EFFECT and gate it behind PRO: LITE renders the
chip greyed out with a PRO tag and cannot open its slider; restoration of
older settings that carry hdf > 0 still blocks export in LITE.
Play/licence pass:
- drop unused permissions (ACTIVITY_RECOGNITION, READ_MEDIA_AUDIO/VIDEO,
SYSTEM_ALERT_WINDOW) and requestLegacyExternalStorage
- rename the Leica sims to LC STREETLIFE CLASSIC/VIVID, drop the brand from
comments; fix app name text, canvaskit copyright, LICENSE owner
- remove expo-image-picker and expo-sensors (no JS import), delete dead
exports (computeMatrixTint, cinemaSeasonName, base64 helpers,
formatCoordinate)
- versionCode 3 / versionName 1.2.1, drop the personal email from About
- add docs/privacy-policy.html for the Play listing
Size: R8 + shrinkResources + bundle compression + ABI trim, 161 MB -> 76 MB.
LITE used to hand back the RECIPESCAM mark instead of the user's own
watermark and treated every saved recipe as PRO. That is the wrong half of
the product: the looks the user dials in are the reason to shoot, the
printing and the paid extras are the reason to pay.
What LITE now owns outright: the eight film sims, the bundled recipes, up
to three recipes of its own, its own watermark text (in one basic face,
the platform families stay PRO), the plain frames, and FAVORITED. What
needs PRO: the three printed frames, the GPS stamp, the other fonts, and
the next recipe past the limit.
- entitlement: `Look` is {frame, gpsWm}; `isFreeRecipe` is gone, the
recipe gate is a count now, decided in App (`liteSaveBlocked`).
- export: a LITE export draws the custom mark AND the RECIPESCAM mark, so
`liteMark` joins `watermark` in the options and the stamp block loops
over both with one set of bounds.
- panel: past the limit the strip's trailing chip is a `+` carrying the
PRO tag, which names the build instead of opening the form.
LITE lets you pick any preset, frame or watermark and preview it; only the
export is held back, and nothing on screen said which chips those were until
you hit the alert. Each such chip now carries a small amber PRO tag at its
top-right corner.
ChipDef gains an optional `pro` flag, set on the three printed frames, on
recipe chips (bundled or user-made, via isFreeRecipe), and on the custom
watermark chip. The tag renders only where `!IS_PRO`, so it is invisible in
the PRO apk.
The set is two apks and the unlock key was a second, weaker lock on the
same door. A verifier that runs offline has to carry its secret inside
the lite apk, so anyone who unpacked it could mint a key. Nothing in the
lite build can flip the gate now.
- entitlement.ts keeps the gate (which look is PRO, what an export
carries in lite) and exports IS_PRO straight from the build flag.
- SETTINGS loses the key field; the plan chip still says LITE / PRO
ACTIVE and the helper text says what lite cannot export.
- The upsell alerts just name the build that has the feature.
- tools/keygen.mjs goes with the verifier it fed.
Both flavors build from one JS tree: `lite` hands out the free apk
(com.locphamtran.recipescamera), `pro` sells as-is (same id + .pro, label
"RecipesCam Pro"). Release is signed from android/keystore.properties, both
files gitignored - lose either and no later build can install over this one.
The tier reaches JS through src/provariant.ts, which tools/set-variant.mjs
rewrites before each build (`npm run apk:lite` / `apk:pro`); the gradle flavor
alone would ship a Pro apk that thinks it is Lite.
The dev scaffolding goes: the three src/dev probes and their App effects, the
EXPO_PUBLIC_CAPTURE_MODE [CAPTURE] timing log, and the -PdevtestSuffix
side-by-side install hook. 'balanced' stays the shipped capture mode, which is
what those probes measured on the 12S Ultra.
Looking at the picture: WB now converts kelvin through the Planckian locus into
a luma-normalised gain (unity at 5500K, symmetric tint) instead of the old
one-sided push; LEITZ STREETLIFE splits into CLASSIC and VIVID; selecting a
recipe loads every knob it carries over the defaults and stays editable, and
RESET hands the panel back to the sim's own values. The in-app library picker,
the ultra-wide native module and recipe share/import land here too.
CLARITY and LIGHT GLOW existed only on the camera worklet and the export
engine, so a photo opened from the library ignored both. They now run in all
three library preview branches (libPhoto), and the preview clips them to the
drawn image - the export engine always clipped its bloom to the canvas, the
preview drew it over the whole rect, so the bloom bled past the photo onto the
black letterbox and over the frame's mat.
Dragging the date bar fired a window query every 120ms while one query takes
over a second on a 12S Ultra, so ~20 queries queued behind each other, the
grid froze for the length of the drag and the stale one landed last - the
grid settled on a date the finger had long left.
The window now opens on both sides: a page above the target, so a list parked
mid-library still has content above it and a downward drag does not die on
offset 0, plus the target page and everything older. jumpTo coalesces the
drag into one query and parks the grid on the row the target date sits on;
scrolling back up to the top pages newer photos in and corrects the offset by
hand, because maintainVisibleContentPosition keeps the offset glued to index 0
and walked the grid forward in time as it paged.
LITE previews every look and feature but export/render is blocked while a PRO
look is in use, and every LITE export carries the RECIPESCAM mark. Keys are
generated offline (FNV-1a checksum over a fixed secret, 16 chars from a
no-ambiguity alphabet) and activate one machine or a thousand: nothing is bound
to a device, so revoking a leaked key needs Play Billing plus server validation.
CREATE, FAVORITED, the star chip and the TopBar + SAVE now answer with a PRO
prompt instead of a silent no-op; CREATE still drafts and applies the look so
LITE can try it, it just cannot persist.
The SETTINGS card also lifts above the keyboard now: RN Modal is its own dialog
window, so the IME never resizes or pans it and the UNLOCK row was sitting under
the keys.
Pressing and holding on the photo with a LIGHT/WB/FX panel open asks App
for a preview drawn without the edit that gesture just made; lifting the
finger asks for the edited look back. Pegged to one gesture, not one
pointer-move: App only re-snapshots the 'before' state after a 700ms
pause, so the whole drag compares against its own starting point.
Preview-only - the sliders, RECIPE and the export keep reading the real
adjustments. Moving past TAP_SLOP, a second finger, or a release all end
the peek, and a peek is not a tap, so tap-to-focus and double-tap zoom
are untouched.
- FRAME tab now pinches the whole view (frame + photo + watermark) in both
camera and library; one finger pans that view. Preview only: the exported
file is identical at 1x and while the view is magnified.
- Watermark pinch/drag stay relative and keep priority while the WATERMARK
row is open, so they still work after returning from the FRAME tab.
- Exports go through a native MediaStore insert into DCIM/Camera, falling
back to expo-media-library when the native save fails.
The watermark chip used to be the only GPS control, so turning the watermark
off also stopped the photo from carrying coordinates. Split the two: a GPS
master switch in Settings decides whether the location is read at all, and the
chip decides whether it is drawn on the photo.
0x889d is also written as UTF-8 now — a place name with accents ("TAM KỲ, ĐÀ
NẴNG") was going out latin-1 and reading back as mojibake.
- FRAME/CROP: choosing a ratio shows the amber band (border + 0.55 dim);
APPLY collapses the preview to the crop rect with an opaque mask and
removes the amber stroke; RESET returns to 'none'.
- Viewfinder: libCropView (k = min(vw/dw, vh/dh)) + cropScreenPx drive the
mask/band, libViewMatrix folds the crop transform into the image groups,
libCropTouchStyle keeps touch mapping aligned.
- Persist cropApplied in the session snapshot and restore it only when it
still matches cropRatio.
- Add PLAN-2026-09-09.md with the measurements.
tsc --noEmit unchanged at 14 pre-existing errors.
EXIF Orientation only knows 0/90/180/270, so a library still carries no
record of how the camera was held. The sensor had nothing to offer.
AUTO now measures the dominant line in the picture itself:
src/utils/horizon.ts runs a shear-projection search (coarse 1 deg over
-45..45, then a 0.5 deg refine) on a <=256px thumbnail, bails when no
line's score beats 3x the median, and returns the tilt in degrees.
App applies photoStraighten = -tilt, so preview and export share one
number exactly as the slider did.
Removes expo-sensors wiring, the horizonRoll state, effectiveStraighten
and the bubble-level overlay (autoRoll prop) from App/AdjustmentPanel/
Viewfinder. expo-sensors stays in package.json.
AUTO turns the amber level line on over the photo, but the line only left
when AUTO itself was switched off: switching to another frame chip, another
parameter or another rail tab kept it painted on the picture.
Gate the line on the ROTATE context instead: AdjustmentPanel reports whether
the ROTATE strip (or its STRAIGHTEN row) is open, App keeps autoRoll non-null
only then, and the frame chips now close the strip like every other chip
does. Verified on emulator-5554: AUTO on with the strip up shows the line
(row 1199-1203, 594 px); tapping LIGHT and coming back leaves it off.
Four follow-ups on the strip added for the quarter turns / straighten / AUTO.
AUTO is "snap to the sensor horizon": it now drops the manual STRAIGHTEN offset when it is switched on, so enabling it after a hand-set angle really levels the photo instead of leaving the angle untouched (the chip goes from "ROTATE 0 · +22°" to "ROTATE · AUTO").
The "<" back button on a slider row returns to the strip the row was opened from (STRAIGHTEN to ROTATE, COLOR TEMP to TEMP) instead of closing everything, and picking another parameter — a frame chip or the global RESET — closes the open row, so the straighten slider no longer outlives the parameter it belongs to.
Opening another photo from the library resets the turn, the fine straighten angle and AUTO with it: a new photo starts level.
The ROTATE strip gains an AUTO chip that reads the device tilt from expo-sensors and feeds it into the straighten angle while the library is open, so the export is levelled to the horizon. It sits right after RESET, combines with the manual STRAIGHTEN offset and with the quarter turns, and both RESET paths clear it.
The accelerator is sampled every 100 ms only while AUTO is on and the library is visible; near-flat and past 45 degrees readings are ignored so the level does not chase noise. AUTO rotates the image by +roll (a +10 degree emulator tilt exports 10 degrees clockwise), which is the sign that matches the preview.
A level line overlay is drawn in the preview: amber within one degree of level, white otherwise. Adds the expo-sensors dependency, so a native rebuild is required.
Two fingers scale the live feed inside a polaroid card / wall opening and
one finger drags it, both clamped to the window, and the shutter passes the
result to the export as frameWindowZoom so the printed crop matches what the
viewfinder showed. The crop centre is mapped through the same out-space ->
raw transform as the window rect; feeding it straight to the raw plane
swapped the axes on a rotated sensor.
RESET was look-relative: it only put the sliders back on the values the
active recipe ships with, so the look itself (a saved recipe, a film sim)
survived the tap. It now restores the state a clean start leaves — the
PROVIA startup look, every parameter neutral, frame off, the custom and
GPS watermarks back to their defaults — and it sits on every tab, pinned
outside the scrolling chip row so it can never scroll out of reach.
Mode and aspect ratio stay put: they frame the shot being worked on, not
the look.
Custom recipes can be overwritten in place (TopBar SAVE now offers CANCEL /
SAVE AS / SAVE and prefills the current name); bundled recipes stay read-only
and only offer Save As. Adds updateCustomRecipe to storageUtils.
Provia/Velvia/Astia/Classic Chrome/Classic Neg/Acros each get their own
primaries+cross-talk matrix measured against the pipeline, plus a split-tone
stage (shadow/highlight tint uniforms) for Classic Chrome's teal and Classic
Neg's green-cyan shadows vs warm highlights.
CROP chip on the FRAME tab for the library's plain frames: NONE, FREE
(drag the box) and the fixed ratios 1:1, 2:3, 3:2, 3:4, 4:3, 16:9. The
preview draws the keep-rectangle over the photo and the export honours it
pixel-for-pixel, pinching and dragging inside the band to pick the framing.
- Viewfinder: build frameRect from the normalised rect so the Skia canvas
never sees undefined width/height (nothing to commit until now), keep
the watermark drag target across the WATERMARK tab so a zoomed photo
no longer resets, and derive the crop band + export rect from the photo
fit rect.
- exportEngine: crop by fraction rect (or the ratio fallback) before the
frame is composited.
- Leaving a plain frame clears the crop, and the ratio strip closes with
the CROP chip it belongs to.
Two zoom-interaction bugs in the library viewer:
- Opening the WATERMARK editor now resets a photo zoom left over from the
panel-closed pass. The zoom had shifted the mark's hit box along with the
matrix and tripped the `libZoom.s <= 1.01` guards, so after visiting another
tab and zooming, the mark could neither be dragged nor pinched.
- A polaroid/wall photo window that MOVES (deck grows: a chip slider or the
watermark text field) now re-anchors the photo transform by the same u/v the
export uses, so the crop inside the frame no longer slides away from the card
(at 2.5x the content used to drift 2.5x the card's move).
Verified on device (9a6a7277): the mark drags again after tab-switch + zoom;
opening WATERMARK returns the photo to the pre-zoom framing; the framed crop
tracks the card within ~2 px over a 62 px deck-driven move.
onLibTouchStart only recorded the pinch baseline when both fingers arrived in
the same touch-start, so a second finger landing later (the normal case) left
wmPinchRef null and the move handler scaled nothing -- pinch-the-mark worked
on the camera viewfinder but not on a library photo. Seed the baseline in the
move handler, as the camera path already does.
Three WATERMARK/FRAME behaviours that share the stamp geometry:
* GPS mark: drag it anywhere on the frame/photo area and pinch it bigger or
smaller. The 0..1 anchor plus the size multiplier ride along in the export
options, so a framed file (whose canvas IS the card/frame) burns the mark in
at exactly the fraction the preview showed.
* The photo's own pinch zoom stays available while the WATERMARK editor is
closed, so a two-finger zoom is never swallowed by the mark while its panel
is open.
* WALL FRAME gains a WALL PORTRAIT / WALL LANDSCAPE chip: the artwork hangs
in its own 4000x3117 orientation instead of the default 90-degree rotation.
3dtours
admin