164055a6c099fee0940ab48e216ee2d39205b705
75 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 3dtours
|
fa0b2cb719 |
fix(heal): one drag is one repair, and the band at its rim is the model's
A press has to mean what it lands on. A drag is a run of spots and the run has a spine, so a press within half a brush radius of that spine takes the drag and dragging moves it, while a press in the outer half of the spots — where the run is not, and a new repair is wanted — lays a stroke against it. Before, a brush near a repaired one was read as a drag OF it: the second stroke was folded into the first and the first moved under the user. Spots carry the drag they came from (stroke), older recipes still answer to the old radius, and the outline of a repaired run is drawn idle so it can be taken hold of (app.css). A repair already made is part of the photo it was made in. The renderer now solves one drag at a time, in the order they were drawn, each against the frame the drags before it have already left — so a stroke laid beside a repaired one invents its pixels from a frame that no longer holds what the first took away, and the repair the user has already accepted does not move when they brush next to it. Measured (probe-seam.mjs, a second stroke laid 2.5 brush radii from the first, counted in levels over the first drag's own circles): 0 at the worst pixel, 0 of 19189 pixels moved by more than two. The ring the first repair left behind was the fill's and not the model's. The model's pixels were laid through the mask's own ramp, so the outer quarter of every spot — where the mask still weighs the fill in at up to full strength — was the fill's, and the fill is the light of the WHOLE box it was built in: a stroke a third of the frame long is filled by blurs up to sixteen brush radii wide, so what it brings there is the box's average and not the rim's. The model is the repair wherever it has one, so it now owns the spot out to 0.92 of its radius (HEAL_PATCH_STOPS) and the fill only meets the photo in the sliver the mask itself fades over. Measured with the same probe: 0.76 levels of mean change over the repair where it was 1.86, 8.5 at the worst pixel where it was 14.2, and the edge strength at the rim after the repair 0.92 where the photo's own edges around it are 0.5 (1.52 before) — the band that was 8 to 11 levels dark is gone. matchToRim goes with them: the relaxation it ran over every crop measures nothing the band above does not already do, and the probe's numbers are identical with it removed. |
||
|
3dtours
|
bfa207f8b2 | fix(develop): call the tonal rows what the reference calls them (HIGHLIGHTS, SHADOWS, WHITES, BLACKS) | ||
|
3dtours
|
ba181da86b | fix(tone): read the ramp's base from the pixel's own neighbourhood, so highlights and shadows move a region and keep the detail in it | ||
|
3dtours
|
8809eb84b0 | fix(heal): cut the whole brush out of the mask, so the repair takes its colour from the photo and not from the spot it is repairing | ||
|
3dtours
|
4b5e55bc50 | fix(heal): eliminate boundary seams by windowing inpaint clusters to 1:1 scale and smoothing feather transition | ||
|
3dtours
|
8df0a03414 | fix(heal): eliminate border seams with smoothstep feather, 95% solid mask, and matched photo grain texture | ||
|
3dtours
|
dfa75f3356 | fix(studio): resolve iOS HEAL auto-reload and grey blob with fast harmonic inpaint | ||
|
3dtours
|
70ed61b8de | fix(studio): stroke clustering for HEAL, mobile WebGL inpaint stability, and reorganize LIGHT panels with HSL | ||
|
3dtours
|
b37ec97352 | fix(studio): a dust spot is a place on the photo, so the angle carries it too | ||
|
3dtours
|
1d7510366a | fix(studio): a dust spot is a place on the photo, so a quarter turn carries it with the frame | ||
|
3dtours
|
00063a7f7c |
fix(studio): the heal fill is a cascade of blurs, the brush is put down with its tab, and Immich is re-read on the way back
HEAL painted a grey blob over the photo it was meant to repair, and the cause was one draw Skia gets wrong on this build: a snapshot used as a SCALED source comes back with the alpha multiplied into its rgb a second time, so a partly transparent rim — which is what the mask's feather is — was read as a dark wash. A pyramid of halvings is built of exactly those scaled draws, which is why the repair's own rim came out grey; the same source read at 1:1 is exact (measured, tmp-src-probe). So the fill is now a cascade of blurs, all of them 1:1: the cut frame is blurred at a few widths, widest first, each finer one drawn over it, the untouched cut on top. The finest is one brush wide, each next is twice the last, and the count follows the depth of the hole (the stroke's own diagonal against the widest brush), which is what keeps the middle of a long hole filled rather than bare. Nothing is copied from anywhere and the rim arrives with no seam, which is what the passes were always for. And the fill is built on the brush's own box rather than the frame, padded by three sigma of the widest level. The composite reads it only where the mask is, so this changes no pixel of the result (heal-check measures the same masks either way) and it is what makes the repair affordable at the zoom a repair is aimed at: at a 3200px preview a single spot went from 1.7s of frozen main thread to 1.2s, and the heal's own share of that from 0.8s to 0.3s. What is left is the pipeline itself, which is a separate matter. The FIX brush outlived its tab. It takes the pointer on the photo, and leaving TOOLS never put it down — so its layer stayed on the stage over a photo nobody was editing, and its ring came back under the pointer every time the hand crossed a repair, which reads as the tool re-arming itself. It now goes down with the tab, with another chip or another strip, and on a press outside its own two chips, the same way the mask tool does. And the Immich button was missing for a visitor who had just connected a server: the studio and the library are two screens of one page, both mounted, so coming back is a route change and not a mount — the studio's own effect, which reads the server list once a session, never ran again. It is read again on a popstate that lands on /app. Checks: node scripts/heal-check.mjs (the cascade and the box, to the letter), npx tsc --noEmit, and the studio driven in a browser: the button appears on the way back from the library, the brush goes down with TOOLS and re-arms with HEAL, and a stroke over a photo lays one band with no grey in it. |
||
|
3dtours
|
5ac2ffb916 |
fix(studio): a heal stroke is one mask, and the fill comes from its rim
The dust brush had two faults and the second was hidden behind the first. A stroke was a row of independent repairs. Every circle the brush laid down found a patch of its own somewhere else in the frame and pasted it, so a stroke of twenty spots was twenty pastes with twenty rims to match, and what showed on the photo was the run of circles itself. The mask was their union on paper but not on the picture. And the mask was not a stroke either. The brush only ever dropped a spot where the pointer's own sample fell, and a fast drag reports a sample every few centimetres of screen — several brush radii apart. Circles that far apart do not touch, so their union was the row of dots the tool was complained about. The segment the pointer travelled is now walked at the brush's own spacing and a spot is laid at every step, whatever speed the stroke was drawn at. With the mask one shape, the patch had nothing left to justify it. The fill is now a push-pull pyramid over the whole mask: the painted pixels are cut out of the frame as a hole, the remaining pixels are halved and halved again until a level is small enough that no hole is left in it, and each level is drawn back over the one below it. What comes up out of that is the photo where the photo was, and the light of the mask's own rim carried inward where it was not — nothing is copied from anywhere, and a repair matches the grade, the blur and the grain around it because those are the pixels it was made from. Non-destructive as before: the recipe still holds the circles, and the preview and the full-size export run the two passes in engine/exportEngine.ts, the shaders and the mask stops in shared/utils/heal.ts. A recipe written by the old brush still loads; the patch coordinates it stored are simply not read any more. |
||
|
3dtours
|
97fd181cfa |
feat: the camera's own colour, a reading that keeps its place, and cloud links in Settings
- RAW opens at the colour the camera wrote into it: the develop carries the difference against the file's own preview (previewResidual) instead of the per-channel cubic fit, dE00 6.04 -> 0.54; previewMatch.ts keeps only the grid. - Immich reading: keyset position kept across visits, one reading per node, a page in flight retried, timeline buckets for the years on offer. - The wall draws a server frame at the address the proxy serves it (no blob minted for it), and the 80-thumbnail pre-cache on open is gone. - Settings lists the cloud links, flags two that answer at the same address, and forgets one. - Custom frames imported from a file (engine/customFrame.ts, IndexedDB). - Upload an edited frame from Studio to Immich Cloud. |
||
|
3dtours
|
f802989b5f | fix(studio): the EV knob steps by a tenth of a stop | ||
|
3dtours
|
2ab92a05fa | feat(studio & library): sync Light & Color tab parameters (vibrance, highlight, shadow, white, black) to Gradient Mask & add multi-field sorting options | ||
|
3dtours
|
15dab6d65a | feat(library & studio): add EXIF info bar, portrait frame panning, and multi-photo selection with Panorama/HDR context menu | ||
|
3dtours
|
0f123a48dd | feat(frame): add OLD FILM LANDSCAPE and OLD FILM PORTRAIT from old_film.png | ||
|
3dtours
|
555623bdb1 | fix(tone): enhance shadow fill curve to match Lightroom Classic shadow lift on dark fabric | ||
|
3dtours
|
3e61db68d5 | fix(tone): restore measured Lightroom Classic curves for White and Highlight while keeping clean shadow lift | ||
|
3dtours
|
f3aabe9ba8 | fix(tone): correct tone knobs curves and eliminate spatial halo bleed around dark silhouettes | ||
|
3dtours
|
d69ded0853 | web: separate global endpoint curves (blacks/whites) from local tone mapping to eliminate grey aura around silhouettes and bump sw cache to v4 | ||
|
3dtours
|
d266027aae | web: fix halo artifacts on highlight/shadow/white/black adjustments with edge-aware tone mapping and update docker packages | ||
|
3dtours
|
acbb2bba4b |
web: the four tonal knobs are sized by what the eye can see, and the highlight head is squared so a bigger rate fits inside the cube
The report was "giá trị thay đổi của các thông số quá nhỏ, không thể hiện được
trên thị giác của ảnh" — at the doc's own rates a full +100 was worth 0.060 of
luma on BLACKS, 0.082 on HIGHLIGHTS and 0.042 on WHITES, and the probe that ran
the frame through the pass read BLACKS +100 moving its mean by 0.0001. Every
rate below is now the largest its own move allows, measured rather than
inherited: 0.058 -> 0.080 on BLACKS, 0.082 -> 0.113 on HIGHLIGHTS and 0.042 ->
0.080 on WHITES, with SHADOWS' 0.151 left where it was because it already bit.
- `TONE_BLACK_LIFT` 0.7 -> 0.93. The ceiling is a FOLD, not a slope: past
0.9387 the doc's own square root carries luma backwards inside its window
(0.94 folds 3.4e-6, 0.95 folds 8.9e-5) and a gradient wears it as a band.
0.93 is the last round rate under it — monotone on the check's 1/32768
grid, and the 1e-4 of travel between it and 0.94 is not a code value.
- `TONE_BLACK_CRUSH` 0.85 -> 8.0. The doc's own form — `L * (1 + amount * W
* 0.85)` — is bounded by its own window, which is 1 only AT the floor, so
its whole visible travel at full -100 is 0.019 of luma: five code values on
a black patch, and a rate past 1 drives the product negative and clips the
toe to a flat black instead of deepening it. The toe's own EXPONENT,
`L -> W * (L/W)^(1 + rate * W)`, is monotone for ANY rate and worth 0.054,
while x = 0 stays on 0 and the 0.18 edge stays on 1 — both anchors and the
compact support kept.
- `TONE_HIGH_GAIN` 2.5 -> 14.0, with the head term moved from `(1 - L)` to
`(1 - L)^2`. The linear headroom dies too slowly to keep the rate's own
ceiling off the clamp: above a gain worth 2.6 the move overshoots 1.0, the
clamp draws a plateau and the ramp falls back over it by 0.018 — the fold
the knee check now measures as a drawdown from the running maximum. Squared,
the move has died out by the time the ramp reaches the clamp: 14.0 is
fold-free at both signs and still lands 1.44x of the 1.5x the quarter it
owns is allowed.
- `TONE_WHITE_GAIN` 1.5 -> 3.0, which takes the top of the ramp TO the
ceiling from 0.92 up and leaves the clamp to flatten what is left. That is
the doc's own §2.4, where a WHITE is the frame's clipping point ("giới hạn
cháy sáng") and not a Hermite that cannot move the head; it is felt only
above the 0.80 shoulder and the head is still exactly 1.0 on 1.0.
`FILM_TONE` is re-solved for the squared head, which is worth less at the 0.75
knot for the same rate: monochrome -0.16 -> -0.1143 and mono-high-contrast
+0.83 -> +0.5929. The four knots the stocks are tuned to do not move — 0.22 and
0.7375 on Acros, 0.17 and 0.815 on Acros HC — and the check pins each of them.
The knee check's guard is REPLACED. The old one compared the first cell of the
sweep against the second (a slope at 1/512), which is blind to a fold that
starts later: it passed a ramp whose own drawdown was 0.018. The new one walks
1/32768 of the ramp and measures `running max - value` for each knob at both
signs, over the four moves alone and then over a 243-combination sweep, so what
is pinned is the fold itself and where it is.
Two folds are pinned rather than removed, both named in the check:
- SHADOWS -100 dips 0.018 (4.6 code values) around 0.06..0.11 of its own
accord. It is the doc's §2.2 formula — `L *= 1 + amount * W * (1 - L)^1.8`
— where the window rises faster than the light, and it PREDATES this change.
The monotone rewrite (`L' = 1 - (1 - L)^(1 - SH * |a| * W(L))`) is written
out beside it and was NOT taken: it is exact but it costs the knob 30-50% of
its crush.
- WHITE +100 rests a plateau on the clamp from 0.92 up. That is what §2.4 asks
of the knob and the ramp is non-decreasing through it, so it is not a fold.
`scripts/tone-base-check.mjs`'s mirror of the pass takes the same three moves
(its own `toneBlack` and the squared head) so the pixel it predicts is still the
pixel the pass draws.
Checked: node scripts/highlight-knee-check.mjs; node scripts/tone-base-check.mjs;
node scripts/auto-tone-check.mjs; node scripts/half-check.mjs; node
scripts/mask-wb-check.mjs; node scripts/preview-match-check.mjs; node
scripts/raw-develop-check.mjs; node scripts/white-level-check.mjs; node
scripts/wb-table-check.mjs; node scripts/sharpen-check.mjs; node
scripts/denoise-check.mjs; npx tsc --noEmit.
|
||
|
3dtours
|
76d84503c9 |
web: SHARPENING lifts only the edge it was pointed at, so a flat half of the frame keeps the grain it came with
SHARPENING was the doc's §4.2 kernel with the two parts of §4.2 missing from
it. `CLARITY_SKSL` evaluated the 3x3 unsharp mask with Mask = 1 on every pixel
and no coring at all, so a flat sky, a cheek and a noise speckle all took the
gain an eyelash took. That is `thay_doi_thong_so_giong_lightroom.md` §1 written
out as a bug: "khi Sharpen, ảnh nổi đầy sạn hạt cát" — the knob could not raise
the contrast of an edge without raising the noise of everything beside it, and
on a grainy frame the second effect won.
`SHARPEN_SKSL` is the doc's own line, `Image + Amount x HighPass x Mask`, with
the two terms it names:
- EDGE DETECTION: the Sobel magnitude G = sqrt(Gx^2 + Gy^2) on luminance, put
through the doc's soft threshold smoothstep(T, T + 0.1, G). Flat fields
read G = 0 and get Mask = 0 — the pixel is handed back untouched.
- DETAIL (halo coring): a high-pass under SHARPEN_CORE is a speckle, not a
detail, and is suppressed. The coring is soft (a ramp across the threshold,
not a cliff) so a detail sitting on it is not switched on and off from one
pixel to the next.
The HIGH-PASS is the doc's Radius, held at one image pixel — 0.7-0.9px on a
Retina panel — and it is a LUMINANCE high-pass carried by all three channels.
A per-channel kernel sharpens a red edge against a green one and draws a colour
fringe down every contour; the file's own §3 rule is to keep R/L, G/L and B/L
where they were.
`scripts/sharpen-check.mjs` pins the three properties the old kernel could not
have: a flat field and a field of grain come back unchanged, a step below the
threshold comes back unchanged, and a hard step moves apart on both sides while
the flat halves beside it stay put. `CLARITY_SKSL` and `clarityUniforms` are
gone with it, and the header note that said CanvasKit had two convolution steps
to replace now says the one it has.
Checked: node scripts/sharpen-check.mjs; node scripts/denoise-check.mjs; node
scripts/tone-base-check.mjs; node scripts/highlight-knee-check.mjs; node
scripts/auto-tone-check.mjs; node scripts/half-check.mjs; node
scripts/mask-wb-check.mjs; node scripts/preview-match-check.mjs; node
scripts/raw-develop-check.mjs; node scripts/white-level-check.mjs; node
scripts/wb-table-check.mjs; npx tsc --noEmit.
|
||
|
3dtours
|
90a7ec9e46 |
web: NOISE REDUCTION takes the colour speckle out of the frame and leaves every strand of it where it was
The knob was a `MakeBlur` image filter on the draw of the graded photo — one
sigma over all three channels — so at NOISE REDUCTION 100 a 1024-pixel preview
lost every edge finer than 0.6 of a pixel of its own and nothing brought the
luminance detail back. That is thay_doi_thong_so_giong_lightroom.md §4's own
warning ("Noise Reduction sẽ làm nhòe toàn bộ chi tiết sợi tóc và vân da") written
into the engine, and the filter had a second cost: a paint filter is handed the
shader's INPUT, so the pass could never read the graded pixels it was supposed to
correct.
It is a two-child pass now, NR_SKSL, run after the draw: the frame, and a blurred
copy of it (blurredFrame — the snapshot read back through the same MakeBlur the
ramp's base and the negative sharpening use). The output takes its CHROMA from
the blurred child and its LUMA from the frame, the split the tone ramp's header
already describes (`rgb - luma`), so the output's brightness is the input's at
every amount by construction — the eye is nearly blind to a hue change at that
scale, which is the whole reason the colour half is free. The reference reaches
NR_CHROMA_SPAN = 0.4% of the frame's width, the doc's own 3..5 pixels of a
full-resolution frame, where the knob's blur was 0.6 of a pixel.
The luminance half of §4.1 (its bilateral filter) is deliberately not here: it is
the half that costs detail and no frame has shown grain the colour half left
behind. ponytail: add it as a second child of this same pass when one does.
Checked: `tsc --noEmit` clean; `denoise-check.mjs` (new) compiles NR_SKSL on
CanvasKit, asserts the engine still wires both children and no longer blurs the
draw, and renders the pass at five amounts against a flat pair — amount 0 is the
pixel exactly, amount 1 carries the neighbourhood's colour difference, and the
luma never moves at any of them; `highlight-knee-check.mjs`, `tone-base-check.mjs`
and `mask-wb-check.mjs` still green.
|
||
|
3dtours
|
e4f5407c19 |
web: each of the four tonal knobs moves its own band of the ramp and not the guard the four used to share
BLACK, SHADOW, HIGHLIGHT and WHITE were four bumps summed into the identity, and the sum carried a guard: the two bumps of a half shared a slope, so past a total of 1 the curve folded backwards, and the ceiling that stopped it was shared by the amplitudes of a half. A stock already sitting on SHADOW therefore took BLACK's lift down with it — on the monochrome stock (sh = -0.24) BLACK at -100 came back with 0.663 of the travel the knob has on its own, which is the "kéo theo sự thay đổi của thông số khác" report exactly. thay_doi_thong_so_giong_lightroom.md section 2 asks for four WINDOWS instead: each knob owns a compact band of the ramp and is exactly zero outside it, and the four moves are applied ONE AFTER ANOTHER rather than summed. A composition of monotone maps is monotone by construction, so it needs no guard, and each knob then measures 1.00 of its travel on every stock. BLACKS is the doc's toe — u = clamp(1 - L/0.18, 0, 1) cubed, opened by sqrt(L) - L at 0.7 and deepened by 0.85, both of which are exactly zero at L = 0, so (0,0,0) stays (0,0,0): the grey pedestal that BLACK +100 left on a black was the sum adding its bump's height at the black point, which is the doc's own "Milky / Foggy". SHADOWS is the doc's bell over the deep tones, HIGHLIGHTS the bell over the bright ones, WHITES the doc's Hermite on the shoulder from 0.80. The ramp keeps its two anchors — 0.00 and 1.00 — at every setting of the four knobs. One deliberate departure from the doc: HIGHLIGHT carries a (1 - L) the doc's raw knee does not, because pow(L - 0.5, 1.5) added to L overshoots the cube above 0.94 — 17% of the ramp driven to flat white at +100 before the clamp. Read against the headroom that is left, the move is zero at L = 1 by construction and the head rolls instead of clipping. The windows are read in the sRGB-encoded luma this file already works in, not in linear light as the doc's section 1 sets out: the doc's own boundaries (0.18, 0.05..0.45, 0.55..0.95, 0.80) land as perceptual positions there, and moving the whole renderer to the linear domain is a bigger change than this pass. The divergence is the one the scratchpad compat doc already warns the Android port about, and it is noted at the windows themselves. Checked: `tsc --noEmit` clean; `highlight-knee-check.mjs`, `tone-base-check.mjs` and `mask-wb-check.mjs` updated to the four windows and passing; the twin ramp over a 1/512 grid is monotone to -0.00119 (0.30 code values, at t = 0.098 with every knob at full negative), both anchors hold for every combination, and a knob outside its band is the exact identity. |
||
|
3dtours
|
bc550569ad |
web: BLACK keeps the picture's texture and not the base it was read off, clarity stops the blur at an edge instead of at a colour, and a backup folder that refuses is handed back to the picker
BLACK at full deflection returned a soft picture, and on a monochrome frame it
returned the blurred base outright. The tone pass reads the ramp at the
neighbourhood's base and then rebuilds the pixel, and it rebuilt it by the RATIO
the base had moved by — `Base' * (Input / Base)`, the other half of
fix_shadow.md's decomposition. A ratio is a gain, and that gain is a function of
the neighbourhood: the knob that takes the base toward zero scales every pixel's
detail by the same coefficient, so the knob that darkens the frame takes its
texture with it. Measured on lightroom_shadow.jpg at 1024px through tone-sim.mjs,
the pass in plain JS with the shader's own constants: at BLACK -100 the finest
gradient came back at 0.75 of the input under the ratio and at 0.98 under the
sum, while the frame darkened the same either way (mean 0.416 to 0.359 both). A
monochrome stock is the whole frame of that error, because all three channels ARE
the pixel's luma there, which is why the picture came back as the base — soft,
and short of every edge it had.
The reconstruction is `Base' + Detail`, ADDED and not scaled, and it costs
nothing where there is no move to make: with every knob on zero the ramp at the
base IS the base, so the difference is exactly zero and the pass is the identity
however coarse the base is. A caller that hands in no neighbourhood at all — a
mask — hands in the pixel's own image as its base and gets the global move back,
which is what the ratio gave it too. `o` is held inside the cube before the
detail is added, so a neighbourhood the ramp has pushed under the floor keeps the
structure around it instead of carrying its pedestal down onto every pixel in the
region. The bright side of the same move is untouched: the lift is still the
neighbourhood's, and at SHADOW +100 the band above the lifted knot still keeps
0.81 of its spread where the global move kept 0.42.
CLARITY drew a light stroke down every contour, and the reason was in what the
blur called a neighbour. The range weight was the colour difference,
`exp(-dot(d, d) * 24)`, which is loose on any coloured edge — two sides of a hair,
a branch or a rail can share a red and differ in green — so the reference reached
across the edge, and the reference is exactly what the blend subtracts. The wider
it reaches, the more a contour reads as detail. It reads LUMINANCE now, one
decision per tap at the doc's own scale (`CLARITY_RANGE_SIGMA` = 0.04), so an edge
of any hue stops the blur dead.
The blend moved the three channels by their own differences, which is what
coloured fringing along every contour was, and the amount it moved them by was
the MASK's `CLARITY_GAIN` borrowed for a different child. It moves LUMINANCE now
— one value carries the whole pixel back with it, so hue is untouchable and skin
does not go sallow at the top of the knob — under the doc's midtone weight
M(L) = 4L(1-L), which deepens the greys a picture is made of and leaves the burnt
ends and the deepest shadows where they are. The positive side's gain lives
inside the shader (4.5, raised from the doc's 1.8 because the range weight above
reaches less far and carries less detail): clarity-halo.mjs, which measures the
pass pushing a pixel outside the range of its own neighbourhood, reads a bright
stroke of 55.3/255 on lightroom_shadow.jpg and 54.3/255 on DSCF1701.JPG at +10,
against the old pass's 145 and 127 at the same knob — and 8.0 already reads 98, so
the knob does not need to go further to keep the flat areas moving.
`exportEngine` passes the knob's own units now, `[clarityKnob / 10]`, since the
gain and the sign are the shader's business and the mask's gain is not the
frame's.
And a backup folder the browser had stopped letting the page write to wrote
nothing and said so, once, with no way back: a permission outlives the tab only
while the tab does, so the row kept reading a permission of a moment ago while
the write went to the disk without one. A refusal that names the permission, or
the folder that is not there, now goes through the picker ONCE — the picker is
the only thing that hands a folder back — and the run is repeated; anything else
is the folder itself saying no, and is not asked twice. The sentence on the
screen is one line over a strip of photographs and cannot carry a reason, so the
reason goes to the console and a word of it into the note (`{why}`, the name the
browser gave the refusal and never a stack), which is the whole of what tells a
folder that was moved from a permission that lapsed. Both dictionaries learn the
word.
Checked: `tsc --noEmit` clean; `tone-base-check.mjs` and `highlight-knee-check.mjs`
updated to the new reconstruction and passing; `tone-sim.mjs` on
lightroom_shadow.jpg at 1024px for the numbers above; `clarity-halo.mjs` for the
stroke.
|
||
|
3dtours
|
166a677590 |
light: the tone ramp is four bumps on the identity, not straight segments between five knots — a knot is an angle, an angle in a tone curve is a Mach band, and the wedge reads the seams: BLACK +100 broke at 0.030 with 105 of second difference, HIGHLIGHT -100 at 0.747 with 72
The ramp was a0..a4 with the pixel's base interpolated straight between them. A segment meets its neighbour at an ANGLE, and the second derivative of a tone curve is what a gradient reads as a band — so a knob left a line across the mid-tones, worst exactly where it was reported: BLACK +100 put its whole lift inside 0.25 and the stretch from 0.25 up came back identical to the untouched frame (the "transition stays grey" it was reported for), and HIGHLIGHT -100 folded a seam into 0.747, between the highlights it pulled and the shadow it left under them. Measured on a 1024-step luma wedge through the exported pass, second difference through a ±1% box: BLACK +100 read 105 at 0.030 against 0.000 from 0.25 up, HIGHLIGHT -100 read 72 at 0.747. Step of the first derivative across the knots: 0.955 at 0.25 and 1.146 at 0.75 — the curve arrived folded, and 1.146 is a sign flip, not a bend. So each knob is now a BUMP on the identity, peaking on its own knot — BLACK on 0.00, SHADOW on 0.25, HIGHLIGHT on 0.75, WHITE on 1.00 — with the kernel (1-u^2)^2 over a half-width (a half of the ramp for the two ends, whose knots ARE the ends, a quarter for the two heads). Level at u = 0, so a knot moves without a fold at its own top; level at u = 1, so a move lands on the identity and on its neighbour without an angle; C1 everywhere between. The two bumps of a half meet on 0.50 both on zero, which is the same fixed midpoint as before, and DR still moves the same knots (0.12 on the toe, 0.18 on the head, half of each on the heads beside them). A sum of bumps can overshoot where two steep sides land on one stretch — past a slope of 1 the curve runs BACKWARDS, a worse band than the seams this replaces, and it is reachable: DR alone was under it, BLACK and SHADOW +100 together were not (unguarded min slope -0.0141). The guard reads each pair at its own steepest points, 8/(3*sqrt(3))/w per unit amplitude (TONE_BUMP_SLOPE_HALF 3.0792, TONE_BUMP_SLOPE_QUARTER 6.1584), holds the two under one and gives them up together past it. A single knob never reaches it (a full BLACK is 0.77, a full SHADOW 0.77), so every slider keeps its whole travel; the worst case is DR at full, which gives up a tenth of its head roll (0.18 -> 0.8376 on the head), and BLACK with SHADOW both at +100, which arrive at 0.65 of their own lift instead of folding. Guarded, the sweep over five levels of all four knobs and DR reads a min slope of +0.0183 and a max of 1.9937, with the largest slope jump 0.00005. After: the same wedge, the same pass. The knot steps are 0.096 at 0.25 and 0.478 at 0.75, with no sign flip — C1 across the knot instead of a fold. BLACK +100 now carries the rework out of its own quarter: +0.139 at 0.25, +0.101 at 0.30, +0.033 at 0.40, 0.000 at 0.50, where it used to read 0.000 from 0.25 all the way up. HIGHLIGHT -100 keeps its lift (-0.126 peak against -0.121 before) and spends it over the quarter instead of into a line. Every knob on zero is the identity to the last bit — the pass also runs for the stock split tones and for DR alone — and 0.50 is still the one value no knob moves. Checks: tone-base-check.mjs now runs the bump and the guard as arithmetic beside the shader (with the negative control: the unguarded pair still folds, the guard is what stops it). highlight-knee-check.mjs reads the kernel and the two slope constants off the source, pins the four amplitudes and the guard, and sweeps the travel of every knob as before. All ten checks that run without a browser pass, build clean. Skipped: the guard's ceiling is a constant, not a search for the widest travel that still clears a band we cannot see. Add when a frame shows a band the deflections in hand cannot explain. |
||
|
3dtours
|
097e383b86 |
light: the tone base is a real blur, not nine point samples of one — the ring aliased the luma and the ramp painted the alias back as mottle
The base layer shipped last commit was nine POINT SAMPLES of the child, one ring out at TONE_BASE_RADIUS. A ring is not an average, and on a frame with texture at the ring's own scale it is worse than one: the nine lumas differ, the sample pattern beats against the texture, and the base field comes out aliased. The gain the pixel then rides, o(base)/base, is a function of the base with a kink at every knot — so each alias of the base becomes an alias of the gain, and the reconstruction paints it straight back over the detail it was supposed to leave standing. Reported on a waterfall: grey patches loose on a mountainside, a smear across the face of the falls, and plateaus in cloud and sky (the pass runs whole-frame, so its base is read in the bright end too). Measured, 1160x774 at SHADOW +100, the high-frequency part of the gain field (9px high-pass, where a real base can hold none): 0.0627 for the ring, 0.0048 for a blur of the same radius. Thirteen times. The fix is not more taps — a 7x7 at a third of the step is still point samples, only smaller — it is to stop sampling: the caller blurs. So the base is now a second CHILD of the tone pass, the frame blurred by Skia's own MakeBlur (blurredBase in exportEngine.ts, the draw drawBlurred already made for the sharpening pass) at TONE_BASE_RADIUS of the frame width and sigma TONE_BASE_SIGMA of that radius — a box's equivalent at the radius, so the neighbourhood is the one the radius always named and the cuts are smooth instead of hard. The shader reads it ONCE per pixel and baseLuma loses its loop and its `bx`. That is also the cheaper pass: nine child evals walked the exposure/matrix chain nine times, one eval does not. A caller with no frame to blur hands in the image it is already shading as the base. The tap then lands exactly on t and the ramp is the global move again — a mask's degenerate bx of zero, spelled as a child that IS the source, which is what gradientMask.ts's own call (base == t) already meant. Checks: tone-base-check.mjs is new — SkSL is only compiled at runtime and nothing here compiled TONE_SKSL whole, so the pass is compiled and rendered for real, with the frame and the base held at two flat values a little apart: the pixel has to land on the value the ramp over THAT base predicts (171 for a 128 pixel over a 76 base), and a base equal to the pixel has to be the identity. highlight-knee-check now pins the one tap, the absence of `bx`, the blur, and the two-child wiring. 9/9 pass, build clean. Skipped: no guided filter proper — the base is a plain blur, so a strong edge is no longer held out of it the way the range weight held it (a dark rock a blur's width from the water reads a lifted base and keeps its own darkness). Add when a frame shows the halo; the doc asks for a plain blur and this is one. |
||
|
3dtours
|
e61dccc784 |
light: the tone ramp is drawn through a base layer, not the pixel, so a SHADOW lift moves the region and leaves the texture in it standing — the quarter above the knot came back at 0.57x of its own spread, 0.78x now
The four knots were read at the pixel's own luma, which makes the ramp a global curve: every pixel at luma t lands on the same o whatever surrounds it. SHADOW's a1 is the head of the quarter above it, so lifting it squashed that whole quarter to the half slope left over — measured on a real frame, 0.50 of its spread (shadow-band.py), 0.57 on the deployed bundle — the grey sheet the knob was reported for. A curve drawn through the pixel cannot see local contrast; that is what the eye was reading. So the ramp is read at TONE_BASE_RADIUS (2.5% of the frame) of the luma around the pixel — a 3x3 range-weighted blur, the fix_shadow.md Base x Detail split — and the pixel then rides the neighbourhood's gain o/base, keeping its own difference from it. Base moves, detail stays: the same lift on the same pixels, with the texture inside the region left standing. Full deflection keeps 0.78 of the band's spread now. The base is the same maths in every caller: bx = 0 (a mask, which has no neighbourhood) reads the pixel nine times and gets the old global move back, and with every knob on zero the ramp at base IS base, so the ratio is 1 and the pass is the identity however coarse the base is. Skipped: no chroma compensation (Hunt). Measured, the ratio held saturation (0.3184 -> 0.3169), so it is not earned yet. No linear-light ramp either: the multiply is a uniform gain on encoded values, which is the same stop exposureMove already argues for. |
||
|
3dtours
|
25b1312e0a | light: AUTO and the shipped recipes ride the halved knobs too — AUTO's ceiling doubles with them so a blown frame still comes back the way it did, and each recipe's HIGHLIGHT/SHADOW doubles so its look stays on the knot it was tuned to | ||
|
3dtours
|
a56581c757 | light: the HIGHLIGHT knob rides half its anchor too, so a lift stops drawing a cloud to paper and a pull stops flattening the quarter under it — the top quarter came back at 0.26x of its own contrast, 0.62x now | ||
|
3dtours
|
36fb93658b | light: the SHADOW knob rides half its anchor, so a lift stops drawing the band above it flat — a waterfall's spray came back at 0.10 of its own contrast, 0.55 now | ||
|
3dtours
|
851563ed73 | light: the pixel rides o/t, not a held chroma — SHADOW and BLACK drained a dark red to 0.505 of its saturation, it is 0.742 now | ||
|
3dtours
|
cc186c4d09 |
The trial gets a date and WB's presets get a table
Two asks, one row of the studio each. The first is copy: a band under the header, the same shape the verify bar below it takes, saying which features are on trial, on whom, and until when. It is a notice and not a task, so it wears the plain surface rather than the accent, and it carries no dismiss: the date is the message. The string is in the dictionary like every other, Vietnamese as written and English beside it — the band is one line at both lengths in a 1440-wide window, and it sets no nowrap, so a narrow window wraps it rather than cutting it. The second is the WB panel's presets. They were a wrapping strip of seven identical pills, which is the wrong shape for one kind of value read against the others: nothing about "SHADE" said 7500K, and nothing about the row said which end of the scale anything was on. They are a TABLE now — two columns of buttons, laid out as a grid — and each button is painted with the cast it puts on the frame: the same swatch the TEMPERATURE ruler already prints under its track (temperatureSwatch, the engine's own gains on a mid grey, halved), so the button and the ruler cannot disagree, and the kelvin is printed on the button beside the name. A button that is a swatch cannot use the theme's text colour for its label: the fill is a mid grey by construction, and mid grey is exactly where white and the light theme's near-black both sit near the 4.5:1 line. So the label is given the ink that fill can carry, chosen by WCAG's relative luminance against black and against white — whichever of the two ratios is larger, which is the one that cannot fall under 4.5:1. The border is that same ink, which is what makes a button stand out from the page it sits on and from the six beside it; the accent takes the border over while the preset is the one in force, since the fill can no longer say so. Both the fill and the ink ride in as inline styles — they are the value, not the theme — so the chip needed two fields and a tinted class, and the row needed a grid mode. The TEMP strip reads the same two fields through choiceChips, because the same seven presets are painted in both places and two opinions about 3200K is the bug this would have been. The chip's own value slot is deliberately unused here: `.chip .val` sets its own dim colour, and a dim grey on a mid grey button is the failure this commit is about. Verified: scripts/wb-table-check.mjs — readableInk picks the better of its two inks for black, white and four mid greys, all 151 swatches across the ruler (2500..10000K, every 50) and all seven presets clear 4.5:1 under the ink they are given, the swatch runs the way the ruler does (red up, blue down, #517eff at 2500K to #947d61 at 10000K), and the seven presets collapse to the five fills their kelvins do. In the running app through a probe: the notice prints in both languages (Vietnamese one line, unclipped), 7 buttons in a 147px + 147px grid, TUNGSTEN filled rgb(98,130,187) with ink rgb(11,14,18) and a 2px border of the same, AUTO the accent border rgb(206,117,9) while it is the preset in force, and the panel holds at 420px wide without overflowing. The panel was viewed in both themes. npx tsc --noEmit clean, npm run build clean. Co-authored-by: PenguinHarness <noreply@penguin.local> |
||
|
3dtours
|
899921ef8a |
A dark detail stops being copied beside itself: DEHAZE reads its prior off a copy of the frame
Raising DEHAZE drew bright copies of every dark detail in the photo, stacked alongside it. The prior was the reason, and the prior was read wrongly. The 5x5 patch of DEHAZE_SKSL was sampled inline, five taps out at 0.625% of the frame's width each — one tap every 6.67 pixels of the 1067-pixel preview, an average spacing over a 26-pixel patch that is meant to be the minimum over it. A detail thinner than that spacing therefore sat between two taps on one row and under a tap on the next, and the transmission swung between "this patch holds a shadow, leave it alone" and "this patch is all haze, divide hard" with a 7-pixel period around every dark thing on the frame. A rising DEHAZE drew that period: `t` is a per-pixel divisor, so the rows of the detail that were left alone stayed put while the rows read as haze came up bright, and the 13.3-pixel column spacing made the next copy and the copy after that. That is what was stacking. Measured on a synthetic frame of sloped haze with four one-pixel dark lines: the old shader departs from the clean correction by +58 to +102 codes (8-bit) at exactly +/-6.67 and +/-13.3 pixels around each line — the two spacings, in both directions, which is the whole signature of the bug. That frame is otherwise flat, so those deviations are the copies. Three things had to be got right, and each is the smallest fix that removes one of them: - The patch is no longer sampled. The caller builds the dark channel as an image — a 64x64 copy of the frame, smallest channel over a cell-wide neighbourhood, then two box passes — and hands it to the pass as its second child, so the shader's own `dark.eval` IS the patch: one cell covers a whole neighbourhood rather than sampling it, and the bilinear upscale interpolates it back up with no period left in it. The box passes are the doc's soft matting in the one form free here — the map is smoothed, not the pixels. The copy is made with drawImageRect, rect to rect: a paint shader drawing a 64x64 rect reads only the source's 4x4 corner, and a one-pixel line in such a copy lands at 166, i.e. pure haze, because the cell covering it is mostly sky. - What travels as that image is the dark channel and not the transmission. t is 1 + 0.95 at the negative end of the knob, more than a channel can carry, so a copy of t would arrive here clipped to 1 and "put the scattered light back" would become a pass that returns its input. The dark channel is 0..1 by construction and the signed amount stays a uniform, where it costs no range — the knob keeps both of its directions. Swept on the real photo, DEHAZE -100 moves 779,237 pixels brighter and 703,114 darker (worst 110 codes) while the same frame at 0 either side of it moves exactly none, and +100 moves the frame the other way at atmosphericLight [0.93155, 0.90980, 0.93084]. - The pass was reading a shader that does not exist yet. `effects()` is what it asks now, not the module variable: nothing above DEHAZE has asked for the effect, so on the first render the variable is still null and the knob stayed dead until some later render happened to fill it in. A map this small only covers the frame if it is told to, and the matrix that does it is the last thing that had to be right: CanvasKit reads a shader's local matrix as the map's own pixels to the frame's, so the 64x64 copy needs frame over map, `[W/64, 0, 0, 0, H/64, 0, 0, 0, 1]`. Without it the pass covers only the top-left 64 pixels and clamps every pixel past them onto the map's last texel — one constant t over the whole photo, a global inversion and not a dehaze. Measured against the ideal ramp, `scaled(n/w)` clamps the same way; the reciprocal lands on it. The knob is left to over-correct at the top of its range, and that is deliberate. A hazy sky still goes white and a saturated colour beside a dark edge still deepens: `(c - a)/t + a` with an airlight near 0.93 and a plain clamp, which is the arithmetic the doc asks for. It is smooth on the frame — 6x zoom panels of the hazy frame at DEHAZE 100 show one wide gradient and no band repeating at any period — so no knee is added to soften a correction that is no longer producing the symptom. If that side ever needs taming, DEHAZE_MAX_OMEGA is the one number. The MASK's DEHAZE still samples the old 5x5 patch inline (gradientMask.ts, unchanged): the frame-wide pass is what the report was about and what is fixed here. Verified: the synthetic harness over four patch configurations puts the new shader at zero deviation from the clean correction at N=64 — the 16.7-pixel cell swallows the test line, which is why the real photo is the judge. The real photo through the running app, with the slider swept 0, 100, -100, 0, is exact at both zero points and moves the frame at both ends, and its zoomed panels at DEHAZE 100 — roof, floor and a wooden rail at 3x and 6x — show the remaining change as one smooth region, the blue of a tarp and the green of a floor stain deepening where the haze was hiding them, with nothing repeated around the dark detail that used to copy itself. npx tsc --noEmit clean, npm run build clean, scripts/mask-wb-check.mjs and scripts/highlight-knee-check.mjs both pass. Co-authored-by: PenguinHarness <noreply@penguin.local> |
||
|
3dtours
|
6d60d452e0 |
One move of the light for the whole app: a mask's EXPOSURE and its four tone knobs stop being a second opinion
A gradient mask had its own tone formula and its own exposure, and both disagreed with the frame's. Before any of this was tidied, the mask ran a smoothstep luma lift with an arbitrary 0.55..1.35 chroma clamp while the frame moved the knots of a four-zone ramp, and the mask's exposure was a stop on sRGB-encoded values while the frame's was a stop on light. Two names, four moves, and the same slider meant different things depending on whether the pixels were inside the shape you drew — the divergence §3.3 of the Android port's compat doc warns about. The maths is one string now (TONE_MATH_SKSL, interpolated by both passes): the ramp the four knots build, the hue-preserving rebuild behind it, the transfer pair, and exposureMove. A mask calls the same functions the frame calls. The rebuild carries the chroma instead of re-scaling it. Lightness takes the curve and the colour rides the difference — the channel differences move by ONE shared scale k, pulled back only where the cube has no room left. The doc's ratio (R_new = R_old * Luma_new / Luma_old) was the old reading and it is exact only while nothing clips: a channel past 1.0 stops being scaled with its neighbours and the hue goes with it. Measured on a flat patch frame, a skin tone at 24.0° came back at 48.0° at HIGHLIGHT +100, a warm white at 37° at 57.4°, and under L = 0.5 the same ratio multiplied a near-black pixel's cast by x30 — colour noise amplified, which is why the 0.55..1.35 clamp was there. The scale is the chroma's own now: over 135 knob combinations on seven colours and five greys, the ramp moves the luma and the hue does not move at all (Δ < 1e-9°). EXPOSURE gets the same treatment, which is what the second half of the request was: the linear domain decides where the luma is going, and the pixel is rebuilt onto it through the same lightMove. The old pass multiplied the three channels in linear light, so +1 EV clipped them by three different amounts: measured on the scratchpad probe, 29.2° of hue drift on a skin tone at +1 EV and 33.3° at +2, against 0.00° here. The stop is applied as a ratio on the pixel's own encoded luma rather than pointed straight at the encoded linear target, which is what makes the knob exactly the identity at 0 EV — the transfer does not commute with the luma weights, so pointing at it brightened a colour by a couple of code values even at zero. A grey is the knob it always was: 128 through +1 EV is 176, the same number the linear per-channel multiply put there, so nothing a user has dialled in moves. Verified: `npx tsc --noEmit` clean, `npm run build` clean. highlight-knee-check now runs EXPOSURE_SKSL for real — compiled with CanvasKit and four pixels pushed through it, agreeing with the twin to a code value on a grey at +1 EV (176), a skin tone at +1 EV and +2 EV, and a shadow at -2 EV; it also pins the hue, the cube, the identity at 0 EV and the black pixel that has no light to move. mask-wb-check compiles the mask pass and pushes the same stops through it: 128 through +1 EV is 176, through -1 EV is 92, +2 EV lands the channel on the ceiling at 255 and holds the hue within 3°. auto-tone-check, preview-match-check, white-level-check, raw-develop-check, half-check and roll-walk-check all pass. Live on the built bundle in a 1440x950 browser: the LIGHT panel's EXPOSURE +1 EV takes the mid grey of a flat patch frame from 0.502 to 0.690 (a stop on light gives 0.686) and moves no patch's hue at -1 EV (Δ 0.00°), and a linear gradient mask's EXPOSURE +1 EV and HIGHLIGHT +100 move the pixels inside the mask (luma 185.9 -> 211.1 and 185.9 -> 197.5) while the corner outside it does not move at all (220.2 -> 220.2), with no console error. Co-authored-by: PenguinHarness <noreply@penguin.local> |
||
|
3dtours
|
3b92e4e2d2 |
A gradient mask can carry the LIGHT column's white balance now: COLOR TEMP and
TINT, the same two rulers, read on the mask's own pixels. The pair was asked for as the two rows the develop column already has, so it is the same pair and not a second opinion about what a kelvin means: the gain comes from one function, colorUtils.whiteBalanceGain(temperature, tint), which the frame-wide colour matrix now calls too — the RGB kelvin fit of kelvinToRGB, the symmetric ±0.08 magenta/green tint, and the division by the product's own Rec.709 luma that keeps a cast from being a brightness move. A mask that never touched the pair reads 5500K / 0 (readMasks' own defaults, clamped to the ruler's ends), whose gain is exactly (1,1,1), so nothing moves and every recipe stored before this reads the same. The measured rule holds inside a mask exactly as it does on the whole frame: at 10000K the mask's pixels came out R/B 1.25 -> 1.72 against 0.994 -> 0.994 outside it. The Kelvin fit is a curve, so it is resolved on the JS side and handed over as a gain: maskUniforms grows one more float4 array (wb[i], three gains and a zero pad) between the spatial pair and the frame size, in declaration order like every other array in that buffer, and the shader multiplies the mask's colour by it right after EXPOSURE — one clamp, three multiplies by one for a mask that leaves the pair alone, and no second copy of the fit in SkSL. The spatial build is a second shader text with a second signature and reads the same array. App.tsx draws the rows where the panel's other rows already are, and TINT rides the existing maskKnobRow helper: same store unit (±10), same ±100 slider the frame-wide row wears since the develop knobs were deepened. COLOR TEMP keeps its own scale (2500..10000, step 100, "10000K"), because a temperature is not a percentage, and it carries the same swatch the frame-wide row paints. Verified: npx tsc --noEmit; npm run build; the repo's check set (highlight-knee, auto-tone, half, white-level, preview-match, library, scan-nav, roll-walk) all pass; and scripts/mask-wb-check.mjs, which is new here — it transpiles the gradientMask graph into a temp dir and checks the gain (neutral at 5500K/0, warm at 10000K, cool at 2500K, luma-preserving, ±TINT symmetric), the clamps, the uniform offsets (the gain lands where the shader reads wb[i], the frame size one array further on), and then compiles the real shader through CanvasKit and pushes a mid-grey through it: neutral leaves 128, 10000K warms it, +TINT magenta-ises it, and both the plain and the spatial builds and a two-mask list read it. The UI was driven on the built bundle too (a linear mask dragged on the preview, then the two rulers moved through their own range inputs): the mask column reports 11 rows, opens at 5500K / 0, takes 10000K and +40 ±100-scale TINT, the swatch follows, and the preview's own pixels warm inside the mask and nowhere else. ponytail: the mask's WB is not skipped for monochrome stocks the way the frame-wide matrix skips it — a local kelvin on a B&W frame is a tint someone asked for by hand, not the colour leak that rule exists to stop. Add the same isMonochromeBase guard (and pass the base filter into maskUniforms) only if that turn out to read wrong on a live B&W recipe. Co-authored-by: PenguinHarness <noreply@penguin.local> |
||
|
3dtours
|
bd57dd72b3 |
EXPOSURE reads in stops: -5..+5, two decimals, on an unchanged store
The tone spec draws EXPOSURE as `min="-5" max="5" step="0.01"` with a `0.00` readout, and the app's row was still the original whole-unit knob: -10..+10 in one step, printed as a bare `+2`. The recipe file behind it has always carried units where one unit is EV_PER_UNIT = 0.25 of a stop, which is the same ±2.5 EV travel, so the two are the same range said two ways. The def now talks stops on its face and units in the store: `min: -5, max: 5, step: 0.01`, a `twoStops` readout (`0.00`, `+0.50`, `-0.25`, no unit because the label is the unit), and accessors that translate — `get` multiplies by EV_PER_UNIT, `set` divides and rounds to 1/10000. EV_PER_UNIT is exported for that one use. Because the ×10 of `deepen` is not applied here and the store's field is untouched, a recipe that shipped with EXPOSURE 2 still means the two units it always meant: nothing gets brighter or darker, and half a stop is still 2 units in the file. The knob steps by 0.01, which is 0.04 units — the slider can express a quarter stop where the old one could only express quarter stops, and everything between them. TINT and TEMPERATURE keep the web's ranges (tint ±100 on the ±10 store scale, temperature 2500..10000 K). The spec's ±150 tint and its 2000..50000 K temperature were reviewed and left as they are: the tint at ±100 is already what `deepen` publishes and the wider pair would move stored looks. Verified: - `npx tsc --noEmit` clean; `npm run build` clean. - Repo checks re-run green: `highlight-knee-check`, `auto-tone-check`, `half-check`, `white-level-check`, `preview-match-check` — the last two render real looks through the engine, so a shifted EXPOSURE scale would have shown up as a brightness change in recipes that carry a non-zero one. - Live browser pass on the deployed build: the row reports `min=-5 max=5 step=0.01`, prints `+1.00` at a full stop, `+0.01` at a hundredth, `-0.25` at a quarter stop down and `0.00` at rest, and EXPOSURE +1.00 still lifts the graded frame (mean luma 184.3 -> 203.4). ponytail: the CREATE RECIPES form (RecipeCreatePanel) still edits a sim's raw adjustments in store units, EXPOSURE included. Leave it there until that form is asked for stops: it is a store editor, not the develop panel, and every field on it is in the same units. Co-authored-by: PenguinHarness <noreply@penguin.local> |
||
|
3dtours
|
c0aaa67361 |
Studio: fold WB and FX into LIGHT, and put every develop slider on -100..+100
WB and FX were separate tabs whose only content was the same Lightroom-style develop column LIGHT already renders, so the rail carried three doors into one room. LIGHT now owns the whole column: white balance, tone, presence, the effects group (grain, dehaze, vignette) and the filters, in that order. The `wb` and `fx` TabIds, their rail entries, their `wbLabel()` helper and the now dead `tab.wb` / `tab.fx` i18n keys are gone; `ToolRail` documents eight tabs. Every continuous develop value that the UI exposes as a symmetric knob now runs -100..+100 instead of -10..+10. `paramDefs` gains the `HUNDRED` key set and the `deepen` helper, which widens a def's range and scales its accessors by ten, so the store keeps its -10..+10 internal scale and every stored look, DEFAULT_RECIPES entry and URL round-trip is byte-identical. Params with a meaningful physical scale (temperature in kelvin, exposure in EV-ish units, grain, grain size, hdf, vignette, rotate, crop) keep their own units. Highlight recovery no longer bends hue. The old knee clamped the per-channel gain into 0.55..1.35, which is a per-channel operation and therefore a hue rotation: on the flat skin patch it walked hue from 24 deg to 48 deg at HIGHLIGHT +100, and on a saturated 30:1 chroma ramp it desaturated toward black instead of toward white. The shader now caps the pixel's distance from its undersaturated knee point while preserving the direction of that offset, i.e. it scales chroma and keeps hue, then clamps into gamut. Verified: - `npx tsc --noEmit` clean; `npm run build` clean. - `node scripts/highlight-knee-check.mjs` (pins the new shader source and twin-tests 135 knob combinations) ok. - Existing checks re-run green: `auto-tone-check`, `half-check`, `white-level-check`, `preview-match-check`, `library-check`, `scan-nav-check`, `roll-walk-check`. - Live browser pass: rail shows exactly the seven expected tabs with no WB or FX; LIGHT renders 5 panels / 23 `data-key` knobs; 12 knobs report `min=-100 max=100`; everything else keeps its own range. - Highlight hue measured on ten flat colour patches: HIGHLIGHT -100 gives a hue delta of 0.00 deg on every chromatic patch; HIGHLIGHT +100 stays within 0.22 deg (sky) and 0.28 deg (magenta) wherever chroma survives, and the patches the ramp intentionally drives to white arrive fully neutral. Greys stay neutral (channel spread <= 2/255) at every knob setting. Skin patch before/after: 23.94 deg -> 0.00 deg. ponytail: temperature (2500-10000 K), exposure (+-10 units at 0.25 EV each), grain, grain size, hdf, vignette, rotate and crop deliberately keep their own scales rather than the blanket -100..+100; widen them the day a user asks for more range, not before. Hue assertions live in the flat-patch check because real-photo measurements pick up 2-4 deg of resample drift from the snapshot pipeline that has nothing to do with the shader. Co-authored-by: PenguinHarness <noreply@penguin.local> |
||
|
3dtours
|
34f8601c91 |
studio: the develop column becomes five panels, and the four tone knobs move knots instead of channels
Two specs, one commit: the develop state becomes the panel column the Lightroom spec draws, and HIGHLIGHT, SHADOW, WHITE and BLACK stop being edits and become shapes of the tone curve, the way the mapping spec measures them. The column. The left rail used to hand LIGHT a row of chips and nothing else; the four tone knobs were chips that opened a curve, and the rest of the develop state lived in the chip row's own vocabulary. `DevelopPanels` renders the five sections of the spec instead — PROFILE, WB, TONE, PRESENCE, DETAIL & EFFECTS — as an accordion, all open, and every parameter the recipe holds has a row in it with a `data-key` off the parameter name: slider, value readout, double-click to default. Sliders are always visible, so a knob is one drag away instead of two taps, and TEMPERATURE and TINT draw their gradient underneath (blue through amber, green through pink) so the direction is on the control. The PRO looks the spec marks stay in the list but locked, tagged PRO, and tapping one asks for PRO — they are shown, not hidden, and not silently dropped. WHITE and BLACK move out of the WB group. They were the temperature group's extremes, which is what a white balance control does — the toe and the shoulder of the same ramp — but the spec puts them with the tone knobs and gives them the two ends of the tone curve, and that is what they now are. `wb` is TEMPERATURE and TINT and nothing else; `whites` and `blacks` sit in `iq` beside `highlights` and `shadows`, labelled WHITE and BLACK, in the tone panel where the slider lives. A recipe written before this commit still reads: the keys are unchanged. The four knobs. The first pass of the mapping spec added a mask per zone onto the channel: `luma += knob * mask * intensity`, and the shader followed it. It is the wrong shape, and the twin harness in `highlight-knee-check.mjs` shows why — the four masks are not a partition of the ramp. They sum to one at the ends and to zero at the midpoint, so an adjustment in the middle of a zone is applied where the mask is half and not at all where the mask has fallen to nothing, and the ramp inverts: with every knob at its stop the curve folds over itself, slope −5 at t=0.87, and the twin catches it as a non-monotone ramp. So each knob moves a knot on the curve instead, which is the reading the spec's own mask geometry points at — BLACK peak at 0.00, SHADOW 0.00→0.25→0.50, HIGHLIGHT 0.50→0.75→1.00, WHITE peak at 1.00 — and the shader builds the curve through those four anchors. `TONE_ANCHOR` is 0.25: one full knob at its stop is a quarter of the range at that knot, so the range is 0.75..1.00 at the top and 0.00..0.25 at the bottom, and the anchors stay ordered (`a0 ≤ a1 ≤ 0.5 ≤ a3 ≤ a4`) by clamping each against its neighbour. Between knots the curve is a straight line, and 0.5 is untouched by every knob, so a knob at zero is the identity exactly rather than nearly, and any combination of the four is monotone. The mask sum survives where the spec is right about it: it hints the split between the two dark zones and the two light ones, nothing else. The hue is kept the way the spec keeps it: work in luma, then scale the chroma offset — `rgb = luma_new + (rgb - luma_old) * luma_new / luma_old` — so a saturated red stays the same red and only its brightness moves. The ratio is clamped to 0.55..1.35 because at luma near zero the division is the whole highlight of the picture on one code value. Verified: - `node scripts/highlight-knee-check.mjs` passes. It pins the settled shader — four masks, four anchors, the four `mix` lines — and asserts the constructions it replaced are gone, then drives a twin of the ramp in JS: the masks do not overlap, every knob at zero is the identity, the midpoint is 0.5 for all 162 combinations of the four knobs, every combination is monotone, the amplitude at each stop is a quarter, and the DR offsets land on 0.12 and 0.82. The folded case from the additive build is in the harness as a regression. - `npx tsc --noEmit` clean; `npm run build` emits `index-DXIIw2F1.js` and `index-A4pA1U5f.css`; `library-check.mjs`, `scan-nav-check.mjs`, `roll-walk-check.mjs`, `auto-tone-check`, `half-check`, `preview-match-check` and `white-level-check` all pass against the bundle — the catalogue, the RAW path, auto tone and the white level are untouched by the panel move. - Driven in a real browser (`tone-live-check.mjs`, Chromium against `vite preview`, a P1010256.JPG in the source control, mean luma of the preview canvas read before and after each knob): neutral 184.25, WHITE +1 187.35, BLACK +1 186.35, SHADOW +1 194.53, EXPOSURE +1 206.99, HIGHLIGHT −1 173.80. Every knob moves the picture the way the spec says it should and none of them moves it much — a stop of a knob is a quarter of a zone, not a level. - The same run asserts the built DOM: five panels, the 23 `data-key` rows, `dev-temperature` in WB, `dev-whites`, `dev-blacks`, `dev-highlight` and `dev-shadow` together in TONE, the gradient classes on the two white balance sliders, and the chip slots the panel is handed. The only failed request is `/api/events`, which is the backend this preview does not run. ponytail: the recovery of blown highlights that used to sit under HIGHLIGHT — a per-channel rolloff in linear light — is gone, deleted rather than ported. The additive mask is why it was there: HIGHLIGHT had to do two jobs because a mask could not shape a curve. Now that WHITE owns the top end, HIGHLIGHT only bends, and the per-channel rolloff is a second knob for the same picture. Bring it back as its own parameter if a frame ever clips badly enough to need it. Also dropped: DR used to ride along as two additive terms. That is where the fold at t=0.238 came from, BLACK −1 and SHADOW −1 together — the two terms pushed the ramp past its own end. It shifts the knots now, which is what the film sims always meant by it, and the numbers in the sims were kept and their meaning recommented (classic-chrome toe 0.22, head 0.7375, etc.). Co-authored-by: PenguinHarness <noreply@penguin.local> |
||
|
3dtours
|
224ff0b935 |
web: open a RAW at the resolution of its sensor, not at the quarter of it
LibRaw's half-size demosaic was on. The Ricoh GR's own DNG (D0004128.DNG) developed to 3010x2012 while the JPEG written beside it in the same second is 6000x4000, and the Fuji's RAF to 3008x2007 against its own 6000x4000 -- the quarter was the flag, not the file. With `halfSize: false` the same develop returns 6020x4024 and it is the sensor's frame on every body tried: D0004128.DNG 6020x4024 IMGP6916.DNG 6028x4024 DSCF1701.RAF 6016x4014 _DSC0009.ARW 6024x4024 AFXT2721.RAF 6246x4170 Nikon-D850 NEF 6216x4136 _GDN0447.NEF 4284x2844 P1010607.RW2 3472x3472 5G4A9396.CR2 2880x1920 Nine files, 27s to 155s a develop on one core. Checked through the app itself, not only through LibRaw: photo-dims 6020x4024 on the DNG against 6000x4000 on the JPEG, both err none. The colour it opens with is now fitted per file to the preview the camera wrote into it (previewMatch.ts): a 3x3 over a block grid of the develop against the same grid of that preview, then one cubic a channel for what the 3x3 leaves. The offline per-body table this replaces (cameraMatch.ts) stopped matching the moment the path under it changed -- its rows no longer summed to 1 once the highlight knee landed ahead of it -- and a body with a row opened with a cast one without did not. The file's own preview does not age. The white level the gain carries is the frame's own plateau rather than `maximum` (sensorWhite.ts), a factor of 1.89 to 2.00 out; without it every frame opened a stop bright and a body that sat lower (X-Trans, 1.892) never reached the highlight desaturation at all. The desaturation gate reads the gain-lifted levels as well as the sensor's, which is the whole of the magenta: on a body whose cam_mul lifts red and blue (the GR's [2.64, 1, 1.73]) a blown sky crosses the white level at 0.38 of the raw range in red while green crosses at 1.0, so a gate read on the sensor's levels alone stayed shut across it. Measured in the app against the camera's own JPEG, mean dRGB over a 16x16 block grid: +1.20, -5.95, -6.11 with the sensor's clip alone, +0.21, +0.24, +0.47 with both, mean |dL| 21.5 against 10.3. The same grid on the Fuji comes back balanced (+4.7, +5.0, +3.6) and best aligned at offset 0,0. -HL is recovery and +HL is a lift, so they are different moves now: recovery is the doc's soft knee in linear light over the top half, which is the only term in the tone shader that is not a shift and the only one that can put detail back into a blown sky rather than merely darken it. The four checks pin the develop down where it can only run in a browser: raw-develop-check, preview-match-check, white-level-check, highlight-knee-check. |
||
|
3dtours
|
9164bf3228 |
web: read DEHAZE off the dark channel, and let it run both ways
DEHAZE read its haze estimate out of the frame's own bilateral reference — the
patch AVERAGE — where the Dark Channel Prior asks for the patch MINIMUM. That
one word is the whole prior: `dark = min(min(r,g,b)/A)` over a neighbourhood
reads 0 for any patch that holds a shadow or a black frame line, so the
transmission stays at 1 and the patch is left alone, while the average of a
patch that holds a dark pixel is still bright, so every patch looked hazy. The
positive end therefore ground the frame down instead of taking haze out of it:
at +9 the mask moved its own middle band -0.2127 and the frame-wide row moved
the whole frame -0.2311, and the local contrast went the WRONG way (dhp -0.0060
on the mask, -0.0056 frame-wide) — a haze remover that lowers contrast is a haze
remover that is lowering everything.
The pass reads the dark channel from the image it is correcting, five by five
taps at DEHAZE_PATCH_STEP (0.625% of the frame's width per tap, a 2.5%-wide
patch — the DCP's own 15 pixels on a 600px frame, and the same fraction of a
4000px export) in DEHAZE_SKSL and in gradientMask's block, so the mask and the
frame-wide row are the same neighbourhood at every render size. Five by five
rather than fifteen by fifteen because 225 child reads per pixel is what
CLARITY_BLUR_SKSL already refused for a reference the prior does not need to be
that wide. The bilateral reference is now only what CLARITY compares against, so
DEHAZE no longer takes a second child at all.
DEHAZE is signed, which it was not: the knob was 0..10 and the export engine
skipped the pass unless the amount was above zero, so a negative value was a
slider the UI would not even offer. It is -10..+10 now, and the transmission
carries the sign — positive pushes t below 1 and `J = (I - A)/t + A` takes the
scattered light out, negative pushes it above 1 and the same expression scatters
light back in. That is the direction a photo shot through mist wants, and it
needs no second formula: one expression, both signs, the ceiling at
1 + DEHAZE_MAX_OMEGA.
CLARITY's negative side was the last place where a knob meant two different
things depending on where it was read: the frame-wide row softened with a mist
blur of its own radius (MakeBlur, sigma |c|/10*4) while a mask mixed toward the
bilateral reference the positive side reads — two neighbourhoods, two strengths,
one name. CLARITY_BLEND_SKSL now carries both directions of the one move (above
zero the doc's unsharp, below it the mix back toward the same reference, gain
1), so the frame-wide row and a mask's CLARITY are the same reference at the
same strength, and the frame-wide mist blur is gone.
Measured in one harness, one photo, one session, knob at +-9, before -> after,
mask phase and frame phase in the same run (the box is the mask's own middle
box for the mask, the stage's own box for the frame-wide row):
- FRAME DEHAZE +9: dmean -0.1680 -> -0.0751, dhp -0.0056 -> +0.0036, white
band -0.2156 -> -0.0522 — it darkens the haze and raises the contrast
instead of lowering both.
- FRAME DEHAZE -9: dmean +0.0469 (was not offered), dhp -0.0010 — the same
knob on the other side, and the frame gets hazier.
- MASK DEHAZE +9: dmean -0.1490 -> -0.0513, dhp -0.0060 -> +0.0039, white band
-0.1234 -> -0.0274, dark band -0.0595 -> -0.0075 — a mask's DEHAZE is now
the frame-wide move on the mask's own pixels (dhp +0.0039 against the
frame's +0.0036).
- MASK DEHAZE -9: dmean +0.0319, dhp -0.0013.
- FRAME CLARITY -9: dhp -0.0200 -> -0.0094, white band -0.1112 -> -0.0203, so
the frame-wide row no longer pays for its soften by flattening every white
in the frame; MASK CLARITY -9 is the same move (dhp -0.0150, white band
-0.0103) and the two now agree in direction, sign and rough magnitude at
-9. CLARITY +9 is untouched on both sides (+0.0335 mask, +0.0307 frame) and
every other knob's numbers are unchanged to within +-0.0005, which is the
run-to-run noise of the same harness.
`step` was the uniform's first name and SkSL refused the shader with it (a
builtin), which is how a whole DEHAZE row came back with all-zero deltas in the
first measurement after the change; `stepPx` is what compiles. `npm run
typecheck` and `npm run build` are clean, and the stage draws with no page error
(the only console error is the dev server's own `/api/events` 404).
Not ported: nothing. The phone's renderer has no gradient mask and no
atmospheric-light estimate to mirror; `shared/utils/toneShader.ts` and
`shared/utils/gradientMask.ts` are the web engine's own files.
Probes: measure-parity (both phases in one run, one photo, before and after —
the same harness the previous commit was scored with), measure-dehaze2 (the same
script with only DEHAZE in both phases, plus a console listener, which is how
the `step` uniform was caught), sim-dehaze-dcp (the offline simulation that
picked the min-patch over the average: clear frame +9, contrast 0.0248 -> 0.0292
against the average's 0.0248 -> 0.0235).
|
||
|
3dtours
|
5f3257a4d8 |
web: make a mask's knobs the moves the frame-wide row of the same name makes
A gradient mask carried its own copy of the six tonal and spatial formulas, and
four of them had drifted from the columns of the same name. HIGHLIGHT was
inverted: the single shift `0.5 * (shadows*ms - highlights*mh)` put the knob's
`x` on the shadow mask and its `y` on the highlight mask, so turning HIGHLIGHT
up pulled the bright band DOWN and turning it down lifted it — measured at the
mask, +9 moved the top band -0.2295 and -9 moved it +0.0454, and the whole
frame's HIGHLIGHT row reads the other way. WHITE and BLACK were a flat gain on
the end each one owns (`c * (1 + 0.5*k*mh)`), which scales every pixel above the
midtone by the same fraction and so drags the near-whites into the greys rather
than leaving them white: a lowered WHITE took the top band down -0.2117 while
the middle band moved -0.0036, and a raised BLACK pushed the middle band up
+0.0195 for +0.0414 at the bottom — the lift went everywhere except where it was
asked for. CLARITY's negative side was the same unsharp as its positive side
with the sign flipped — `c + k*(c - blur)` with k negative — which is a soften
only in name: it sank the mask's whites (top band -0.0543 at -9) and left the
mask's own contrast where it was (dhp -0.0008), the opposite of what the knob is
named for.
DEHAZE ran after CLARITY, so a mask sharpened its haze and then tried to remove
it; frame-wide the two are the other way round, and for a reason.
The four now mean inside a mask what they mean on the whole frame, because
toneShader.ts is the reference the app's own rows are written from and the same
name on the same knob should not be two different moves. HIGHLIGHT and SHADOW
are TONE_SKSL's additive luma shifts — HIGHLIGHT weighted by the headroom it has
left (1 - t) so it cannot drag a blown white to grey, SHADOW by its own floor —
with the colour difference riding along at TONE_SKSL's damped gain so a lift
cannot collapse a colour. WHITE and BLACK are TONE_SKSL's per-channel point
moves, cubic in each channel's distance from the end it owns, so the toe and the
shoulder move and the midtones stay put. DEHAZE runs before CLARITY, the
frame-wide order. CLARITY's negative side is a real soften, `mix(c, blur, -k)`
toward the same bilateral reference its positive side works against. TONE_SKSL's
two smoothsteps (0.50..1.00 and 0.00..0.55) replace the mask shader's own pair,
and the soft masks are computed in float and narrowed once, the way the
frame-wide shader does it.
Measured in one harness, one photo, one session (the mask's own middle box, knob
at +-9, before -> after on the mask, with the frame-wide knob of the same name
as the reference it is now written from):
- HIGHLIGHT +9: top band -0.2295 -> +0.0298 (frame-wide +0.0547), dark band
0.0000 -> -0.0001 — the lift is a lift, and the inversion is gone.
HIGHLIGHT -9: +0.0454 -> -0.0385 (frame-wide -0.0674).
- WHITE -9: top band -0.2117 -> -0.0646 (frame-wide -0.0860) — a lowered
white stays a white instead of becoming a grey — while the middle band goes
-0.0036 -> -0.0150 (frame-wide -0.0139), which is the move a white ends up
making when it is a point move rather than a gain.
- BLACK +9: bottom band +0.0414 -> +0.0997 (frame-wide +0.1036) and the middle
+0.0195 -> +0.0347 (frame-wide +0.0402) — it goes to the toe it owns.
- CLARITY -9: dhp -0.0008 -> -0.0149 (frame-wide -0.0200) — negative CLARITY
softens now — and the top band -0.0543 -> -0.0113, so it no longer pays for
that soften by sinking the mask's whites. CLARITY +9 was already right
(+0.0333 both sides) and stays.
- DEHAZE, the one knob with nothing on the negative side: unchanged at -9
(-0.1490 both sides, the pass order was the only thing wrong with it), and
the mask and the frame-wide row now agree across the whole range
(1/3/5/7/9 at -0.0124/-0.0397/-0.0711/-0.1074/-0.1490 on the mask against
-0.0133/-0.0423/-0.0759/-0.1151/-0.1619 frame-wide), monotone.
DEHAZE's own numbers are therefore not a mask-only bug: an estimate of the haze
that reads a mask differently from the frame would be inside `atmosphericLight`
and `DEHAZE_MAX_OMEGA`, which both paths share, and changing either moves the
frame-wide DEHAZE column too — left as it is rather than changed under a mask
report.
Everything else about the mask is untouched: `dctrl` is +0.0000 on all six
knobs (a knob still moves the mask's own pixels and nothing outside it), the
shader compiles and the stage draws with no page error.
Not ported: nothing. `shared/utils/gradientMask.ts` is the web engine's own file
and the phone's renderer has no gradient mask to mirror.
Probes: measure-mask-knobs (the six knobs on a selected mask, before and after),
measure-frame-knobs (the same six frame-wide, the reference the mask is now
written from), measure-parity (both phases in one run so the two are the same
photo in the same session), png-parity-report (the before half of that run died
in its frame phase and left no log, so its already-captured mask frames are
re-read off the PNGs with the same box and the same bands), measure-dehaze-curve
(DEHAZE 1..9 on the mask against 1..9 frame-wide, for monotonicity and for the
pass order).
|
||
|
3dtours
|
97bdf605e2 |
web: import the camera's RAW, and grade it like the phone
The studio took JPEG, PNG and HEIC and nothing else, so a photographer's own negatives never reached it. A RAW now loads the way any other file does — `isRawName` reads the extension off a 24-entry list, the file goes into OPFS under one slot (`current_image.raw`, beside `current_image.name`, so a reload finds it again) and `rawDevelop` runs it through LibRaw-wasm: half size, 16-bit output, camera white balance and the camera's own 3x3 matrix, in bands of 2M pixels so a 30MB file never holds a second copy of itself. `example-sony.ARW` (30.3MB) lands as a 3120x2084 picture, no page error. DEHAZE joins the FX tab, where Lightroom keeps it: a chip off the same PARAM_DEFS entry (`dehaze`, 0..10) so nothing new renders chips, and the pass is the dark channel prior — `atmosphericLight` reads A off a 32x32 draw of the photo, `DEHAZE_SKSL` takes omega up to 0.95 over a floor of 0.1 — measured at 71.8% of the stage's pixels moved between 0 and 10. The gradient mask grows the six knobs the phone's has: HIGHLIGHT, SHADOW, WHITE, BLACK, CLARITY and DEHAZE. The mask's falloff is a smoothstep rather than a line, and CLARITY/DEHAZE inside a mask get a blurred copy of the photo plus the air A as a second child of the mask shader — so a mask's clarity is clarity and not a flat brightness lift. The column shows all nine rulers; CLARITY 9 moves 42.2% of the stage, DEHAZE 9 moves 27.9%. CLARITY stops reading the whole photo per pixel: the single pass that sampled a 15x15 box 225 times is now the three passes the same math wants — 1x15, then 15x1, then a blend, `orig + (orig - B) * 3.2` — about 30 reads. Both signs work (77.4% of the stage moves at +10, 79.6% at -10), and the negative branch keeps its mist as it was. The pointer reviews a look before it is taken: resting on a PHOTO STYLE chip or a recipe chip lays that look on the photo while it stays there and gives it back the moment it leaves — byte-identical, measured on four of them (24.9%, 23.8%, 24.5%, 25.3% of the stage moves on, 0.00% off) — while the recipe, the UNDO stack and the session stay on the look the click left. A hovered look brings its colour alone: the masks, the dust spots and the mosaic of the photo being edited ride along, or a pointer crossing a chip row would rub them off. A PRO sim is left out, since a hover that showed its look would hand over what the click gates. Probes: e2e-raw-verify, e2e-dehaze-mask, e2e-mask-verify, e2e-clarity-verify, e2e-hover-preview2. |
||
|
3dtours
|
7e47a153b8 |
web: make EXPOSURE, EV and HIGHLIGHT mean what Lightroom means
A stop is a multiplier on light, so EXPOSURE and EV stop living in the sRGB colour matrix and get a linear-light pass of their own (EXPOSURE_SKSL: linearise, `C * 2^EV`, re-encode). The matrix keeps CONTRAST: a gain on encoded values is what made +1 EV land at x1.5 instead of x2. Measured on the neutral PROVIA sim: EV +1 = x2.011, EV +2 = x3.999, still unclipped at 239. The pass sits between the matrix and the tone shader, and the tone / cinema / curve / glow / halation children all sample through it, so HIGHLIGHT finally sees the value exposure produced instead of the one before it. Recovery keeps `L + strength * mask * (1 - L)` over `smoothstep(0.50,1.00,luma)`, and the colour comes back as `color * (luma_new / luma)`: a blown white stays white (255 -> 255 at -10, 255 at +10), a 0.8 grey loses 33 luma, the midtones beside it do not move. AUTO is the histogram the LIGHT tab already draws: weighted mean luminance (guard 0.001), target 0.48, `log2(0.48 / avg)` clamped to +-2.5 EV, handed to the same knob. A 0.251 grey asks for EV 0.9 and lands at mean 83.0 against the 83.3 predicted, idempotent on a second press. A stock's own bias rides the same pass (`SIM_EXPOSURE_BIAS_EV`, VIVID +0.25 EV) and cancels against the knob, so -1 EXPOSURE on VIVID returns the CLASSIC rendering (measured 0.4149 vs 0.4177). ponytail: the phone app's `src/utils/colorUtils.ts` keeps the old math, so the two copies have to move together; recipes saved before this commit (EXPOSURE 2, HIGHLIGHT +-1) render under the new stop semantics. Verified on the rebuilt container (BASE=http://localhost:8090): - web-exposure-probe.cjs 20 PASS / 0 FAIL (neutral 128 -> 128, EV +1 ratio 2.011, EV +2 ratio 3.999, EXPOSURE +10 ratio 5.62 / -10 ratio 0.172, AUTO EV 0.9, HIGHLIGHT -10 on a 204 grey 204 -> 171, white 255 -> 255, no console errors) - sim-exposure-test.cjs 9 PASS / 0 FAIL (classic 0.4149, vivid 0.4531, knob -1 returning 0.4177, bias 0.0382) - regression suite, 28 probes: mask 53/0, brush-edit 35/0, heal-idle 23/0, heal-zoom-drag 28/0, sims 31/0, sim-vivid 9/0, white-black 4/0, temp-swatch 33/0, tone-curve clean, compare 25/0, create 52/0, wb-preset 33/0, zoom 25/0, save-recent 25/0, web-smoke 9/0 (its export step was stale — EXPORT opens a size picker now). panel-test 4 FAIL, histogram-wb 1 FAIL, studio-save-hl and progate timeouts, landing-test 6 FAIL ($0.99 pricing) are pre-existing. - npx tsc --noEmit clean. |
||
|
3dtours
|
c70edce8c1 |
web: mirror the frame with H-FLIP and V-FLIP, and stamp a typed place
ROTATE gains the two mirrors: H-FLIP and V-FLIP toggle one at a time and stay on through the quarter turns and STRAIGHTEN, which makes them compose with every rotation the strip already offers. ROTATE's own RESET levels the whole frame, mirrors included. The flip itself lands last, in screen space, so a mirrored photo is what the eye sees rather than what the sensor saw; the pixels are copied axis-aligned, so there is nothing to resample. Session state carries the two flags, so a reopened photo comes back mirrored. Also fixes the stamp: a typed PLACE NAME with no GPS fix now prints on its own (latitude/longitude ride in as NaN), instead of the whole stamp and its box being skipped for want of coordinates. |
||
|
3dtours
|
b568fa3fdc |
web: let FX carry Lightroom's two gradient masks, and grade inside them
FX had two tools that change the photo where it is — HEAL repairs a speck, MOSAIC hides a patch — and every knob that graded the frame graded all of it. The scratchpad's gradient_mask.md asks for the two local adjustments the phone's own editor has and Lightroom made familiar: a linear gradient and a radial one. This is that spec, written for the renderer this app actually has. A mask is a SHAPE rather than a value, so it is dragged rather than turned: the LINEAR chip arms a ramp and the next drag on the photo is its two ends — zero at the press, one at the release, the spec's own convention, which is what makes the same gesture a wide fade or a hard edge — and RADIAL arms an ellipse whose centre is the press, whose semi-axes are the drag's own distance and whose axis lies along the direction the hand went, so the circle a drag describes is the circle the mask starts life as. Both shapes keep a pin (the whole shape travels by it) and, while chosen, the handles that move the ends or the axes and the one that turns the ellipse; what is drawn is the shape the render will read, so the ramp and the rim are visible before a knob is moved. Inside the shape, three knobs grade in the spec's own order and its own maths: exposure as `pow(2.0, e)` in stops (its -5..+5), contrast about the middle, saturation as a mix away from the pixel's own REC-709 luma — the mixer's -10..+10 read as the spec's -1..+1 — and a radial mask adds the feather it fades over, which is the fraction of its own axis the alpha holds full before it dies at the rim. Several masks run in the order they were drawn, each reading what the one before it left, which is what a stack of local adjustments is. The maths is GLSL in the md and the renderer is Skia (canvaskit-wasm, SkSL runtime effects), so it is ported stage for stage: one pass, after the frame-wide grade and the vignette and before HEAL, because a local adjustment is part of the look and not a repair — the pixels a repair borrows are then meant to carry the mask's light already. Preview and export both come through renderPhoto, so the file carries the masks the stage is showing by construction, and the shape and the knobs ride in the recipe's own JSON, which is what makes them survive a save. The chips sit with HEAL and MOSAIC because all four take the pointer on the photo, and they are exclusive with every other armed tool, the eyedropper included — while a mask tool is armed the layer takes the photo, so a drag means "draw the next shape" and a press on a pin means "take hold of this one", which is why the shapes already laid are answered through their pin and handles alone. A knob drag on a mask is one undo step, a shape drag is one more, a press that only chose a mask records nothing at all, and RESET is the way back with the whole frame as it was imported. ponytail: the spec's own "Gợi ý nâng cấp" rung — Highlights and Shadows isolated with pow(luma, 3) and pow(1-luma, 3) weight masks — is not here, and neither is Lightroom's per-mask invert and colour/tone range. The three knobs are what "gradient mask" means until a photo shows a sky that has to be rescued apart from the grass under it; the md itself calls it an upgrade, not the feature. Verified: tsc clean; mask-probe 35/0 on the dev server and again on 8090 (the two chips, both shapes drawn and moved and turned, the ramp read off the pixels — 61 -> 244 at the release and 61 at the press — the feather read off the rings, DELETE/UNDO/REDO/CLEAR, and one gesture one undo step); brush-edit 33/0, heal-idle 23/0, heal-zoom-drag 28/0, landing/pro-gate/award-column/otp-code/ tone-curve all ALL PASS, backend 180/0. |
||
|
3dtours
|
88d6d0e648 |
web: read the ring's light by direction, and off the dust's soft edge
The last commit pasted the borrowed patch at the light of the place it lands in,
and read that light as one number per spot: the mean of the ring around the dust
minus the mean of the same ring around the patch. That number is a light the
place has when the ring is all one thing. It is not a light the place has when
the ring is not. A twig, a hairline, the edge of a table under the brush, and a
minority of the taps stand on the thing rather than on the ground: the mean then
follows the minority — it is a colour the place never had — and the patch is
pasted in it. The donor was of exactly the right light, the search had gated it
at LIGHT_GATE, and the repair still lands as a dark blotch. A mean is the wrong
estimator for a ring that is not one thing; the search already knew that, and
reads its own ring as a median for the same reason.
So the light is read once PER DIRECTION. Each of the sixteen taps is a pair of
readings — the place's ring and the patch's ring at the same sixteen places —
and a pixel takes the correction of the two readings it lies between,
interpolated by its own angle around the spot, in the same single draw. The rim
then meets the place all the way round instead of on average: a tap that landed
on the twig bends the part of the rim near the twig, and the far side of the
circle is left where it was. Sixteen taps rather than eight because a tap's
influence reaches only as far as the next tap, so the finer the ring, the less
of the rim one hard pixel of the photo can drag with it.
The second half of the change came out of the app, not out of the lab. With the
per-direction reading and no other change, heal-probe.cjs went from 49 PASS to
41 PASS / 8 FAIL: the repair's own centre came out 15-18 levels dark on a flat
field, with the frame around it clean. The reason is the estimator again, from
the other end — one direction is one pair of pixels and carries no averaging, so
whatever the ring reads at that direction, the patch gets in full. And the ring
at RING_R alone is not clear of the dust: a speck spreads about a pixel past
where it is drawn in the pixels the shader samples, so the nearest taps sit
inside the dust's own soft edge and read the dust's light. The mean had been
hiding it: one contaminated tap in eight is a level off; the same tap read whole
is the blotch. The ring is now a pixel further out again (RING_PAD), in the same
pixels the sampler works in — a fraction of the radius would be nothing at all at
the sensor-dust end of the brush, which is where this tool is aimed — and the
probe is back to 49 PASS / 0 FAIL.
Measured on a sweep of the two ways of reading it (heal-ring-sweep.cjs, CanvasKit,
three scenes, the step the eye reads at the rim plus the level of the patch's own
middle against the ground it landed in, levels out of 255):
scene shipped mean 8@1.15 this: 16 taps, per direction
uniform light difference step 0, centre 0 step 0, centre 0
twig across the ring step 53 (mean 16.4), step 56 (mean 2.4),
centre 34 dark centre 0
brush fits the speck centre 5 dark centre 0
The worst step on the twig scene is unchanged — that is the twig's own edge
crossing the rim, which no level can meet, and the floor the copy set at 85. What
moved is the average (16.4 levels to 2.4) and the level of the patch's middle,
which is the blotch: 34 levels of a place that never had them, down to none.
No new dependency. cv.seamlessClone is the same thing this shader already does —
the membrane half of a Poisson edit — and OpenCV.js would be 5-10 MB off a CDN,
solved on the CPU per spot, outside the one draw the preview, the recipe and the
export all read from: the correction is recomputed from the snapshot on every
render, which is why the preview and the exported file agree by construction and
why a saved photo opens onto the same repair. It also cannot run in the worker
the brush paints in or against the fractions the recipe stores.
Verified:
heal-blotch-lab.cjs (scratchpad, CanvasKit, no browser) — new, 12 PASS / 0
FAIL, and 8 PASS / 4 FAIL against the bundle built from
|
||
|
3dtours
|
57ade27eee |
web: paste the borrowed patch at the light of the place it lands in
HEAL borrows a patch of the photo and copies it over the dust. The copy brings
the patch's texture — which is the point, the repair is the same picture rather
than a blur over the speck — and it also brings the LIGHT the patch was
photographed in, which is not the point at all. The search already refuses a
donor from another light: LIGHT_GATE is 20 levels, and a candidate past that is
not scored. But inside the gate a patch can still be 20 levels off, and 20 levels
is a soft blotch of its own at the rim of the circle — a mark where the dust
used to be, which is what the user is complaining about when they say the repair
is visible. On skin, sky and sand the dust is not the problem the eye finds; the
step the paste puts down is.
So the paste is now the patch's gradients worn at the destination's level: the
shift is the mean of the ring the spot sits in minus the mean of the same ring
around the patch it borrowed, and what lands is the borrowed pixels plus that.
It is the membrane half of a Poisson edit — keep the texture, adopt the level —
and it is eight taps per spot inside the shader that was already running. No
solve, no ping-pong, no extra pass: the correction is recomputed from the
snapshot inside the shader on every render, so the preview and the export agree
by construction and the recipe carries nothing new. The same spot in a saved
photo opens onto the same repair, because nothing about the correction is stored.
Where the ring is measured turned out to be the whole of the change. The first
cut read it at the feather line, 0.85 of the radius, which is where the pasted
patch is still at full strength and therefore looks like the natural place to
compare — but that ring sits just inside the circle, and when the brush fits the
speck snugly, which is exactly how a dust brush is used, it reads the speck: the
light the repair is measured against is then the dust's own, and the patch gets
shifted onto the very dark it exists to erase. It also reversed the smoothstep
edges the moment the ring was pushed outside the brush (a radius past rad, edges
the wrong way round, and the pass quietly drew nothing). The ring now sits just
OUTSIDE the brush, at RING_R of the radius — the same radius the search reads a
spot's light at. Outside, both sides are photographs: the ground the repair has
to sit in, and the ground the patch came from. That the two are the same
measurement is the point: a donor that passed the gate was already within
LIGHT_GATE of this ring, so the shift it now receives is bounded by the gate. The
decision to borrow and the correction to the borrow stopped being two different
opinions about the same pixel.
Eight taps at the same angles on both sides is what makes the difference read as
light rather than as texture: the grain, the detail and the neighbouring specks
that differ between two patches are averaged out by sampling both rings at the
same places, and what is left is the level. The rim, measured as the level inside
the circle against the level of the ground outside it, drops from 20 levels to 0
on a scene built for it, while the borrowed contrast stays at 40 — the level
moved and the gradients did not. That is the line between this and a blur, and it
is the line the lab holds it to.
Verified:
heal-seam-lab.cjs (scratchpad, CanvasKit, no browser) — 10 PASS, 0 FAIL: one
scene, the speck on the grey ground with every reachable patch inside a block
20 levels darker, run twice through the real pipeline — the paste the branch
shipped before this change (the copy, kept inline in the lab as the "before")
against healSkSL from the bundled heal.ts. The copy puts the block's own
level down at the rim: inner 100/110/120 against outer 120/130/140, rim step
20.0 levels, contrast 40. The shift lands the borrowed texture on the
ground's level: inner 120/130/140 against outer 120/130/140, rim step 0.0
levels, contrast 40 — the borrowed feature is still pasted at the strength it
was borrowed at, the hole reads as the ground it sits in, the block the patch
came from is untouched, and the frame away from the repair is the photo.
heal-skia-lab.cjs 28 PASS / 0 FAIL against the bundled module: the pass still
runs, the uniform block is the size its shader declares, and the paste is
still an exact copy of the source pixels — the lab's paste scene now borrows
from the SAME light (a white pixel at the middle of the borrowed patch, so a
copy and a blur of the dust cannot be confused), and its forty-spot and
three-spot runs still draw every spot in order. The scene where the two
lights differ is the seam lab's.
heal-search-lab.cjs 15, heal-probe.cjs 49, heal-zoom-geom.cjs 5,
heal-zoom-probe.cjs 8, mosaic-skia-lab.cjs 27, mosaic-probe.cjs 51 — all 0
FAIL, against the rebuilt app at http://localhost:8090 (docker compose up -d
--build frontend).
Regressions against the rebuilt app, rc=0, 0 fail: landing-test.cjs 172,
pro-gate-test.cjs 27, award-column-probe.cjs 18, otp-code-probe.cjs 10,
tone-curve-probe.cjs 42; backend npm test 180 passed, 0 failed; frontend
tsc --noEmit clean.
ponytail: the shift is one number per spot, measured over the rim, so a border
the two patches disagree about along its length is only matched on average — a
repair laid across a hard edge keeps a faint step where the edge crosses its rim,
and the other half of the Poisson solve (a correction that bends inside the
circle, a Jacobi solve over the spot's own box, a ping-pong pass per spot) lands
only when a real photo shows that step and the eye can find it. The gate is still
needed and still refuses: a shift corrects a light, it cannot invent a patch
where no patch of that light exists, so a speck surrounded by dust from another
light is left alone rather than covered with a guess. The source is still found
by the ring search — eight directions at three distances, each mirrored — and not
by PatchMatch: the search already refuses dust and wrong light, and PatchMatch
lands when a real photo shows the search picking a bad donor. The run is still
drawn spot by spot, with no stroke id in the recipe, so a long drag is a row of
circles rather than one region.
|