- FX: new VIGNETTING 0-10 control (chip + slider). Darkens the four
corners of the photo with a radial gradient whose radius is the photo
diagonal/2, so the falloff stays circular on any aspect. Applied in
preview (camera overlay, polaroid/wall window, plain library) and in
exportEngine pass 6b, always on the picture, never on the mat.
- LIGHT: new VIBRANCE -10..+10 (chroma-masked saturation in the tone
shader: vivid pixels move least). Renamed the existing saturation
control chip from COLOR to SATURATION - same param, clearer label.
- Fix: <Shader> takes a RuntimeEffect, not a gradient SkShader; the
preview vignette threw "Object is not a HostObject" when it got one.
Use the declarative <RadialGradient> child on the Rect instead.
- Preview: drop the "AE/AF LOCKED - TAP TO UNLOCK" banner; the lock
reticle is now itself the unlock touch target.
The custom watermark captured EVERY image touch whenever the chip was ON
with text, in both modes: after switching from a library photo to the
camera there was no way to give the image back to tap-to-focus, and a
frame picked for the still rode along onto the live preview (and into the
capture).
- AdjustPanel: CANCEL chip next to ACCEPT. It drops the un-accepted draft
and restores the last ACCEPTED mark (none if nothing was accepted).
- Viewfinder: draws the mark whenever the chip is ON with text, but only
lets it CAPTURE touches while its editor is open (new wmEditing prop).
A double-tap ON the mark still re-opens that editor from the library
viewer.
- App: ACCEPT and CANCEL now close the editor (that closes the placement
layer with it). Switching mode closes the deck panels, and leaves the
frame behind: camera mode has no FRAME picker to undo one.
Verified on device (9a6a7277): camera tap locks AE/AF with the watermark
left ON; library polaroid no longer appears on the live preview after the
switch; CANCEL reverts the chip to CUSTOM WATERMARK OFF and closes the
panel; ACCEPT closes it and the next capture embeds the mark (amber text
found at 0.5/0.375 of the 3000x4000 export), while a capture before
ACCEPT carries none.
The built-in lens filter, simulated the way it is done in Photoshop: pull the
highlights out with a hard contrast curve (out = 2.5*in - 1.5, black below 0.6),
Gaussian-blur that selection, then Screen it back over the photo at reduced
opacity. Screen against a near-black pixel is a no-op, so areas with no
highlight within the blur radius come back byte-identical while lit areas
spread their light.
One 0..10 knob drives both the radius (4%..1.9% of the width, ~10..50px at
2560 wide) and the opacity (0.15..0.5), matching the recipe's 15-50px radius
range. The extraction composes on top of the recipe colour matrix so a
monochrome look glows white instead of leaking the original colours back.
Runs in the Skia export engine only; the P5 native path is not wired into the
app (dev parity probe only), so it is left alone for now.
Watermark editing no longer covers the photo: the preview letterboxes the
image inside its fit rect while the deck is open, and the idle hint is gone.
The FRAME tab can rotate a library photo 90 degrees clockwise. Rotation
swaps the pixel dimensions instead of the frame, so the polaroid/wall window
keeps its aspect and every consumer (cover crop, watermark area, export) picks
up the new orientation from width()/height() with no extra layout branch. The
rotate surface is CPU-backed on purpose - a GPU snapshot loses its pixels
before the next frame and renders the photo black.
Custom watermark text can now be dragged anywhere on the photo, double-tapped
to re-edit, and is only baked into the file once ACCEPT is pressed; the export
engine takes the same position. It also gained COLOR/SIZE/FONT chips, with the
font list read from the OS via Skia's FontMgr so any installed family can be
used.
The framed windows (polaroid card / wall frame opening) now take the same pinch + double-tap gestures as plain library, clamped so the photo keeps covering the mat opening, and the visible sub-rectangle is handed to the export engine so the file matches the preview.
Wall frame export also stopped crashing: on Android release an image asset resolves to a drawable *name* ('wallframe') and is flagged downloaded, so Asset.downloadAsync short-circuited and readAsStringAsync threw 'Unsupported scheme for location wallframe'. Clearing that state lets the native module copy the drawable into the cache.
Edge-to-edge (edgeToEdgeEnabled) makes Android ignore the manifest's
adjustResize, so the IME never shrank the window and the text input sat
under the keyboard. Track keyboardDidShow/Hide height and pad the deck.
Restore shutter sound/metering/RAW from a dedicated key under both 'default'
and 'last session' startup (the session file only stores the look and is
written on background events, so it can be stale after a force-kill). Guard
the persist effect until hydration finishes so the mount-time defaults cannot
overwrite the stored values; drop the stale session override of these three.
Flip only reconfigured the CameraSession in place, leaving the Skia
offscreen-surface cache from the old lens wedged on this Xiaomi: after a
flip the preview banded then went black while the frame pipeline kept
delivering (heartbeat kept rising) and only a full app restart revived it.
- key <SkiaCamera> by facing + mount nonce so a flip fully unmounts and
remounts the camera (lib clears its surface cache on unmount), i.e. a
clean restart on every lens switch instead of an in-place reconfigure.
- watchdog now recovers by the same full remount instead of an isActive
toggle (which never revives a wedged preview), budgeted to 3 restarts.
- bump a re-render on every onStarted: after a remount cameraActive never
drops (no onStopped on unmount) so the reopen did not re-render and the
new controller was never re-read, leaving the 1x-10x zoom chips hidden
until the next touch.
Verified on device: 15+ flips with no wedge, chips visible immediately
after each flip, preview stays live (was ~5 min to black before).
- Settings STARTUP MODE chips (AsyncStorage startup_mode): default = clean camera
+ PROVIA neutral 4:3, last = restore full session look.
- initSession: resolve sim-* recipe ids via FILM_SIMS (fix clobber of session
ratio/adjustments to 4:3 canonical); restore via setSelectedRecipe not
applyRecipe so user tweaks (frame/geotag/ratio) survive restore.
- applyDefaultStartup turns GPS watermark OFF (user-requested default).
- Shutter: OFF must not play click on must-play-policy devices. VisionCamera
v5.2.3 HybridPhotoOutput.kt plays MediaActionSound itself gated by
(enableShutterSound ?: true) || mustPlayShutterSound — on Xiaomi mustPlay=true
so OFF still clicked. Both capture paths now gate on enableShutterSound != false.
node_modules patch not trackable -> artifacts/patches/vision-camera-shutter-silent.patch.
Verified on Xiaomi 12S Ultra: log SND user=false -> play=false; cold-start
DEFAULT shows GPS WATERMARK OFF.
Local Kotlin module modules/recipescam-export (autolinked via expo ./modules)
exposes decodeEncodeAsync — BitmapFactory decode -> JPEG q95 encode -> file,
all on Dispatchers.IO off the JS/main threads. EXPO_PUBLIC_BENCH=1 builds run
src/dev/nativeBenchProbe.ts: 3 timed decode+encode passes on the bundled
wallframe artwork plus a JS-timer gap check proving the JS thread never
blocks during native rendering. Legacy Skia engine untouched (reference).
Plain frame 'none' with ratio 4:3 shows the whole sensor at screen width (85 deg FOV, like the built-in app at 23mm equiv); 3:2 crops the two vertical sides, same height and zoom, matching the export crop. The fullscreen-cover plain preview from 7985f25 was a wrong interpretation of the built-in view and made every ratio look identical fullscreen.
Plain frame 'none' with an aspect ratio no longer bands the feed into a letterboxed strip; it keeps the fullscreen cover view like FULL/1x, so 4:3 preview shows the same angle of view as the built-in camera app at 1x (export crop unchanged). Border/bars frames (classic-white, cinematic) keep the banded contain view.
The band region was the ratio photo re-scaled to the screen width, so 3:2
(0.667) rendered taller than the 4:3 (== native 3:4) band and zoomed the
scene. Anchor the band on the contain-fitted native sensor box instead and
cut the ratio strip out of it at the same scale: 3:2 is now the identical
vertical view with a narrower horizontal crop, never a taller image.
SkiaCamera cover-fits the upright frame snapshot onto the fullscreen view,
so a 4:3 ratio band (aspect == native 3:4 sensor) only revealed a center
slice of the sensor instead of the whole frame. Redraw the feed inside the
frame worklet: when a photo-area rect is active (ratio band / polaroid
window / wall window) black the surface, clip to the rect's raw-frame
inverse under the renderToTexture rotation/mirror CTM, and cover-map the
sensor there. Equal-aspect bands now show the full sensor; narrower ratios
(3:2) crop center like the export. Inactive feed keeps the legacy draw.
admin
3dtours